How much energy (fuel) is needed to calcine and dry one metric ton of lithium concentrate in a rotary kiln?
How much natural gas (cubic meter) is enough per ton of input?
#Rotary_Kiln #Natural_Gas #Lithium #Calcination #Drying #lithium_carbonate
Hello, Has anyone successfully modeled 2D argon plasma jet using the COMSOL? I would greatly appreciate any guidance on this matter.
30 June 2024 5,597 0 View
Hello everyone, I'm facing an issue with EDS software that prevents me from obtaining atomic or weight percentages for my scan. However, I do have access to the raw data, which shows intensity vs....
29 June 2024 6,664 14 View
The picture shows a GITT diagram of a graphite and silicon composite half cell. Why does it indicate a reversible to higher voltage in the circles shown? Is it due of the electrode's high...
05 December 2023 3,356 2 View
Hello, I'm planning to sample live snails and ship them internationally. My goal is to immerse live snails in liquid nitrogen to reduce expression noise, then grind the tissues and use a...
11 May 2023 6,819 2 View
As shown in this discharge voltage-capacity diagram, an irregular upward voltage reversal occurs at the beginning of the discharge process. What could be the cause, and how could it be prevented?
02 March 2023 5,577 6 View
I'd like to calculate the diffusion coefficient from the Galvanostatic Intermittent Titration Technique (GITT), but there's no information on how to do so. One strategy is to detect them by...
20 February 2023 1,853 3 View
Hello Does anyone know how to convert the reactive surface area of a mineral (e.g. magnetite) from cm2/g to cm2/cm3? Thank you in advance
24 December 2022 5,488 4 View
The streamflow is solely from the chlorinated effluent released from a tertiary treated wastewater. Finally this stream is merged to another river and flow speed of the river is decreasing from...
21 November 2022 5,570 2 View
Required for age estimation analysis.
24 October 2022 9,032 0 View
Hello every on, I am modelling a corrugated wall printed by 3DCP so there is a problem with drawing a parabolic or catinary arch in ABAQUS software. would any one guide me how to do it? Thanks
11 August 2022 2,794 0 View
I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...
13 August 2024 9,795 0 View
I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...
09 August 2024 9,621 0 View
How can we differentiate between calcite, dolomite, siderite, magnesite and ankerite minerals in carbonatite rocks in thin section under optical microscope?
07 August 2024 2,132 3 View
Metal-containing heterogeneous catalysts often need to be calcined before reduction, so what are some examples of catalysts that perform better without calcination? What is the reason and how many...
05 August 2024 909 2 View
XRD Analysis is showing only Calcium carbonate. It is not showing other compounds. Can anyone help me get the other compounds
04 August 2024 3,019 3 View
Hello I am conducting a microstructural analysis of a soil treated with lime. The following sem images are of the untreated s1 and treated soil s3. The untreated soil contains quartz calcite...
01 August 2024 572 0 View
FYI Catalyst is MFI zeolite Si/Al = 140,25.40.11.5,15 I am using this catalyst to study methanol to DME conversion
25 July 2024 2,486 2 View
My research work is related to the calcination of limestone. I have a complex question and would like to consult with experts in this field. Could you please advise which kiln to choose (a...
18 July 2024 1,390 2 View
Mangroves were reported to eat into limestone atolls like so much cake - but could it have been diatom partnerships at mangrove roots that ate into the rock? If gypsum formation is a clue, how...
12 July 2024 159 2 View
We have been using MFC to control the flow rate of pure ammonia gas. The MFC is placed in an oven at 50 deg. C to avoid blockage due to NH3. However, after a few days of usage, the MFC is unable...
11 July 2024 5,796 1 View