How is taking SEM and FTIR of seed before and after cold atmospheric plasma treatment?

More Hom Bahadur Baniya's questions See All

Main steps for coupling between uncertainty code and a thermal hydraulic code?

Hello every one, I want to make a coupling between the uncertainty code DAKOTA and a thermal hydraulic code (Relap5, PARET,...). But what i know until know, to make a coupling, we have to perform...

08 May 2024 4,950 0 View

My university bought SPSS 29 faculty premium package saying it has AMOS, I could not find, how can I locate and use AMOS?

Aloha Everyone, My university recently bought SPSS 29 Faculty Premium Package, the vendor is thinkEDU, the said AMOS is part of it, that is one of the reason we bought, but there is no AMOS inside...

31 August 2023 3,217 3 View

Relap5 error: Open failure number 29 on file ks1rst.rstplt perhaps file is not available?

hello, it will be very kind if any one shows me how to fixe the relap5 error: Open failure number 29 on file ks1rst.rstplt perhaps file is not available. when we use restart...

05 June 2023 1,589 0 View

How can we get new standard deviation while calculating mean difference (subtracting one mean from another, having different SDs)?

Greetings, Let's say I have a mean value X with SD 1.5 (i.e. X ± 1.5) and another mean Y with SD 1.3 (Y ± 1.3). If I have to subtract those mean values, how can I do it for Standard deviation?...

06 December 2022 1,416 1 View

What is the range of N/P ratio to be a pond eutrophic or oligotrophic?

It is said that a pond becomes eutrophic with higher values of N/P ratio. It starts to be covered with algal blooms, checks light penetration causing the death of the organisms inside. I wanted to...

14 October 2020 6,230 2 View

Does the Covid-19 pandemic have any positive consequences on Environment??

Does the Covid-19 pandemic have any positive consequences on Environment?? if you have any opinions/evidences/data records, I am very much eager to know it, would you pls share with us?. I am also...

11 August 2020 6,161 4 View

How can we fight against this global pendamic COVID-19. Right now, Nepal is suffering in its second stage. How can protect frontlinners first?

Expected the suggestions and recommendations in this regard.

06 August 2020 1,231 2 View

What is an effect of APPJ on cancer cell treatment?

Discussion about its results

06 February 2019 4,072 1 View

What is the effect of plasma jet treatment on polymer modification in an argon environment with water vapour?

Discussion need

13 January 2019 300 0 View

Can overhead stirrers or mechanical stirrers be used for small batches of solution in ml?

Actually, I am trying to use an overhead stirrer in my research as I am dealing with very viscous solution. However, I can only find stirrers with minimum stirring volume of about 18 litres. So, I...

26 December 2018 9,274 1 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

RNA later for the preservation of RNA in fecal samples at room temperature for one day (37°C)?

I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...

06 August 2024 1,367 3 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

How much total RNA concentration to be extracted from sorted plasma cells from bone marrow of C57BL/6 mice for RT-PCR ?

i have sorted anti-NP specific plasma cells from bone marrow of C57BL/6 mice at certain times after immunization with variable counts and isolated total RNA using TRIZOL method for RT-PCR using...

05 August 2024 8,835 1 View