sir, the multiphase eqns are different from a general machine,it cannot be implementes in sim power system, i have got its eqns but i m having problems in implementing it
still having problems with the modelling,can somebody help if i provide with the eqn n datas
Alternatively, a multiphase induction generator can be simulated in MATLAB using SimPowerSystems by setting up the parameters needed for your multiphase purpose. Hope this helps.
What I said is to use SimPowerSystems by setting up the parameters to suit whatever needed for your multiphase purpose, but I did not say that you need to implement the multiphase equations in it, because SimPowerSystems is just simulation and it does not deal with equations. You should convert the equations into math boxes in MATLAB/Simulink first before using the SimPowerSystems. Hope this helps. Good luck anyway!
Simulink SimPowerSystems and help informations will be enough for this type working.
Yes, I agree with Ibrahim. Just use the help index in MATLAB and type your question to ask MATLAB/Simulink. I am sure that you should be able to figure it out in SimPowerSystems with their help. MATLAB provides pretty good information for researchers.
If you want to build the simulink model of the machine yourself without using SimPowerSystems toolbox, you need to see the following book:
Dynamic Simulations of Electric Machinery: Using MATLAB/SIMULINK – September 29, 1997
by Chee-Mun Ong (Author)
I think, the book by Chee Mun Ong - Dynamic Simulation of Electrical Machinery, will help you. If you cant find it, I may send you some matlab files. All the best, Okan
The following Articles may Help.
1. International Journal of Scientific & Engineering Research, Volume 4, Issue 12, December-2013 1995,ISSN 2229-5518
MULTIPHASE INDUCTION GENERATOR (MODELING, ANALYSIS AND SIMULATION) AND POWER QUALITY
Mithilesh Singh1 Shubhrata Gupta2 K.B.Yadav3
ABSTRACT: In this research work the generator scheme presented in is based on the dual stator winding induction machine with displaced power and control three-phase winding having same number of poles and it deal with the double stator machine with extended rotor common to both stators. The analysis of steady-state performance is important for ensuring good quality power and assessing the suitability of the configuration for a particular application. Here complete modeling the Multi phase Induction Generator shown and so power quality improves.
Link: http://www.ijser.org/paper/MULTIPHASE-INDUCTION-GENERATOR-MODELING-ANALYSIS.html
2. Modeling and Simulation of Multiphase Machines in the Matlab/Simulink Environment
Alberto Tessarolo ,Alberto Tessarolo
Full Text is available in R.G.
Link: https://www.researchgate.net/publication/221917889_Modeling_and_Simulation_of_Multiphase_Machines_in_the_MatlabSimulink_Environment
3. Also in view of the Treatment of a Six Phase System as two Mutually Coupled Groups of Opposing Three Phase Systems,the Analysis of which exhibited Mutual Coupling only Between them Only in the case of Zero Sequence Components. In the Fault Analysis and Protection for Six Phase System. The Results obtained were the same as when the Six Phase System was Considered as a whole. Some of Our Papers on this are uploaded to R.G and re in my Contributions.
This treatment will be useful in converting the existing Double Circuit Three Phase Lines into a Six Phase Line to have an integrated Three Phase Six Phase System with no alteration in Line Configuration to have the all the advantages of Six Phase Transmission.This is an alternative to Compact Six Phase Line which is costly.
In the Light of it I Feel that Two Three Phase Generator Blocks in Simulink with one Block in Phase Opposition may help as an alternative to Six Phase Generator Block.
You may Try.
P.S.
Chapter Modeling and Simulation of Multiphase Machines in the Matlab...
Dear My Friend,
I will collect the codes and try to send you. Could you please send me your private e-mail address? All the best, Okan
Thanks Okan for ur reply,my email adress is [email protected],kindly send them
Hello okan u had said that u will be sending the code ,sir pls send it at [email protected]
- Badges
- Science topic
- Similar topics
- Engineering
- Electrical Engineering