How do I set up two electrode overall electrocatalytic water splitting with temperature control system?

More Snahasish Bhowmik's questions See All

Is there any software to plot heterojunction band diagrams?

I am trying to draw band bending at Si-SiO2 interfaces due to doping and anneal effects

17 March 2020 7,381 5 View

How can I determine if the strain I am working with, is resistant to Ciprofloxacin by MIC?

I am working with S.aureus isolates. The MICs obtained against Ciprofloxacin were 31.25ug/ml, 15.625ug/ml and 0.061ug/ml for the different isolates. Could anyone help me with understanding the...

18 November 2019 3,647 3 View

How can I improve my transfection efficiency?

Cell Type: HEK293T cells DNA: pCMV delta R8.2 (3 ug was used) Reagent: Lipofectamine 3000 Plate: 6 well plate Cell density: 4.3X10^5/well 80% Confluent cells/well Incubation time:...

20 March 2018 1,515 9 View

Is it necessary to normalize the impact factor of all the journals in different fields of science based on the time scale of publication?

In recent times, it is noted that the impact factor is widely varied in the journals under the fields of Physics, Chemistry, Materials science, Biotechnology etc. It does not mean the journal with...

09 February 2018 2,189 7 View

How can I create SMEs (superconducting magnetic energy storage) coil block in MATLAB simulation?

27 December 2017 5,373 4 View

Cell Line Facility in INDIA

Is there any Cell line facility available in this pandemic time (INDIA)?

01 January 1970 6,567 2 View

What is the best way to keep an anaerobic chamber anoxic in the absence of hydrogen?

I'm a graduate student who works with an anaerobe, so I often work in an anaerobic chamber. I've been working on an assay that involves the steady-state of the quinone/ quinol pool. Anoxic...

03 March 2021 2,971 1 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

How to separate water from glycerol solvent in a solvent recovery vacuum distillation column?

I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...

01 March 2021 9,525 4 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...

01 March 2021 3,703 3 View

Why is the sum of the elements in a row in a Q matrix equal to zero?

When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?

28 February 2021 3,864 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Rahul Sharma

Article Innovative Strategies for Electrocatalytic Water Splitting

Jagadeesh Bhattarai

Article Durability enhancement and degradation of oxygen evolution a...

Article Development of Mn-Mo-X-Y-Z-O based electrocatalytic material...

Yurii V Geletii

"for studying how much potential required to electrocatalytic water splitting into hydrogen and oxygen" you need a two compartment cell with three electrodes. Now, it's obligatory to measure the O2 and H2 yields. All these require high experimental skills. I would advise you to visit a well established laboratory to learn.

Snahasish Bhowmik

Thank you for your reply.