I need to sustain a greater number of titanium nanoparticles on a Kevlar surface; the surface could be wet in petrol as well.
Use of titanium Alkoxides in acidic medium
I suggest at first time to add DMDCS as adhesive in to the nanoparticles in solvent. After that evaporised solvent and mix hydrophobic powder with kevlar.
Since paraffin oil is about 90% n-alkanes (16-20 C chains) I imagine that the interaction between the painted surface and these alkanes is to be controlled.
10 November 2014 6,660 0 View
I always seem to be wasting time looking for polymers for specific applications. Some times, I need high viscosities, some times I need specific densities. I would like to know is there a site/...
06 July 2014 6,342 7 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
Hello, if you made a transwell assay where you incubate the cells with a nanoparticle-encapsulated drug and considering that in the oposite compartment you'll have both the free and encapsulte...
03 August 2024 2,730 1 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.
31 July 2024 9,140 2 View
Dear Researchers, Is it feasible to distinguish between alpha and alpha prime martensite in the Ti6Al4V alloy under rapid solidification in the as-cast state using XRD, in addition to...
30 July 2024 3,849 0 View
I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...
28 July 2024 8,027 3 View
How much volume of siRNA can I add to 2.5 mL of liposomes with a total lipid concentration of 10 mg/mL?
27 July 2024 6,920 1 View
Some of the techniques I am familiar with are standard. I would like to know which of the two methods under study is preferable, as well as the cost and list of particles and devices needed in...
22 July 2024 1,921 3 View