How can we simulate microwave reactor in Aspen Plus?

More Jainam Vora's questions See All

Determine the total thermal conductivity in Ansys Workbench for a component with the mixture of concrete and cement?

Tempreture 1 = 20C Tempreture 2= 200C Thermal Conductivity for Concrete = 1.6 W/m*K Thermal Conductivity for Cement = 1.7 W/m*K what should be the boundary condition? How can i find the total...

04 January 2019 3,921 2 View

Anyone have an easy MS excel template to share for Reaction Engineering Approach modelling of dairy powders?

26 July 2018 2,994 1 View

How can I separate glycerol from formic acid in HPLC analysis?

I am having trouble separating formic acid from glycerol since they have the same retention time. My formic acid peak is supposed to be very small as compared to glycerol. I tried 0.2 flow rate at...

14 June 2014 6,139 1 View

How to use IPG carmaker with Simulink?

Simulating the driver assistance system with IPG car maker and MATLAB-Simulink, or can ADAMS be used in place of that?

18 February 2013 9,194 2 View

Looking for volunteer opportunity for software development

Hi Guys, I am looking for volunteer software development opportunity for some project. I carry 5 years of software development experience mostly with Python. Currently I work at a company called...

01 January 1970 8,811 6 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

What are the most relevant MSc proposal topics for Petroleum Production Engineering at the moment?

I am a Petroleum Production Engg MSc student at Robert Gordon University in Aberdeen and I am in the process of selecting a topic for my MSc Engineering Investigation proposal. I would very much...

01 March 2021 7,396 4 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

How to model Supercritical water gasification (SCWG) process in Homer software?

Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?

25 February 2021 4,075 1 View

D2D implementation in Matlab in Vienna LTE software?

Hi Hope you are well. Can you please share your code for D2D implementation in Matlab. I want to implement D2D in Matlab based Vienna simulator and struggling to deploy D2D. Thanks

24 February 2021 9,378 3 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View

Is it possible to set a breakpoint at a specific DYNAMIC instruction using the GNU Debugger (GDB)?

Using GDB, it is straightforward to debug and monitor a target program by setting a break-point at a specific instruction, since the instruction addresses are known. However, we have two...

24 February 2021 1,598 2 View

Langevin Dynamics in shear flow?

Hi, We are trying to simulate particles with Langevin dynamics in a shear flow by Lees-Edwards boundary conditions in MD simulations. It seems thermal forces and shear flow do not go hand in...

23 February 2021 1,761 1 View

Should I use Pressure Based Solver or a Density-Based Solver?

Dear researchers, I want to simulate a flow (air) in a wind tunnel, and I want to integrate a fluidic actuator inside it in order to control the separation of the boundary layer. At the blower...

22 February 2021 4,882 3 View

Muhammad Zohaib Safdar

Aspen Plus is a process simulation software that can be used to model and simulate microwave reactors. Here are the general steps for setting up a microwave reactor simulation in Aspen Plus:

Create a new simulation in Aspen Plus and define the components that will be used in the simulation.

Add a reaction block to the simulation by going to the "Data Browser" and selecting "Reaction Blocks." Then, select the type of reaction block that will be used, such as "Chemical Reaction" or "Heterogeneous Catalysis."

Define the reaction kinetics by selecting "Reaction Kinetics" from the "Data Browser." Enter the relevant kinetic parameters, such as the rate constants and activation energies, for the reactions that will take place in the microwave reactor.

Add a microwave heating block to the simulation by selecting "Microwave Heating" from the "Data Browser." This block allows you to specify the microwave power and frequency, as well as the geometry and material properties of the reactor vessel.

Connect the reaction block and microwave heating block using a heat exchanger block, which can be found in the "Heat Transfer" section of the "Data Browser." This block allows you to specify the heat transfer coefficients between the reactor and the microwave field.

Set up the simulation conditions and run the simulation to obtain the results.

Keep in mind that the specific steps for simulating a microwave reactor in Aspen Plus may vary depending on the specific reactor design and the types of reactions being modeled. It is recommended to consult the Aspen Plus user manual or seek further guidance from experienced users or experts in the field.

Jainam Vora

I am not able to locate the microwave heating option in data browser. Can you please help me with that? Muhammad Zohaib Safdar

If you are not able to locate the microwave heating option in the Aspen Plus data browser, it could be because this option is not included in the default installation of Aspen Plus. Here's how you can check if the option is available and, if necessary, add it to the data browser:

Check if the microwave heating option is available in your Aspen Plus version by going to the "Data Browser" and selecting "Unit Operations." Then, expand the "Energy" category and look for "Microwave Heating." If it is not there, proceed to step 2.

Add the microwave heating option to the data browser by clicking on the "Data" menu and selecting "Add-Ins." Then, select "Aspen Properties" and click "OK." This should open the Aspen Properties window.

In the Aspen Properties window, go to the "Component Database" tab and select "Add..." under the "Group" column. Then, enter a name for the new group (e.g., "Microwave Heating"), select "Microwave Heating" as the "Type," and click "OK."

Close the Aspen Properties window and return to the Aspen Plus simulation. Go to the "Data Browser," select "Unit Operations," and expand the "Energy" category. You should now see "Microwave Heating" as an option.

If you still can't find the microwave heating option after following these steps, it could be that your version of Aspen Plus does not include this option. In this case, you may need to upgrade to a more recent version or contact AspenTech support for assistance.

Can you please send the snapshot of where the Add-Ins option is available in Aspen plus as I am not getting it? Muhammad Zohaib Safdar

Certainly! Here's how to access the Add-Ins option in Aspen Plus:

Open Aspen Plus and open the simulation you are working on.

Click on the "Data" menu in the top menu bar.

Select "Add-Ins" from the dropdown menu.

A list of available Add-Ins should appear. Select the one that you want to use, such as "Aspen Properties."

Here's a screenshot of the "Add-Ins" option in the Aspen Plus interface:

https://www.aspentech.com/en/resources/on-demand-webinars/using-aspen-properties-in-excel

I hope this helps! Let me know if you have any further questions.

I have attached the screenshot of mine aspen plus interface. Can you please tell me here about the aspen properties window or the add-ins option? Muhammad Zohaib Safdar