What are the saturated salt solutions that can give specific relative humidity of 35%, 65% and 95% for conditioning wood specimens?

Due to the unavailability of climate rooms, I want to carry out an experiment that require the use of certain saturated salt solutions especially those that can condition the wood specimen to 35%,...

25 February 2021 8,139 1 View

What's the concentration recommend for recombinant protein use in western blotting?

I'm currently working having problem with the concentration for recombinant protein use in western blot, the one been used is Recombinant Human CD19 Fc Chimera Protein-rndsystem which does not...

24 February 2021 8,514 3 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View

How to perform Haldane correction on SPSS?

I was wondering if anyone knew how to perform the Haldane correction for SPSS (this is the definition of the correction -...

21 February 2021 2,882 1 View

How can I multiply values with standard distribution and with triangular distribution?

I am calculating emissions considering the uncertainty of the data to do Monte Carlo simulation. Some variables such as yields have normal, lognormal or even uniform distributions. These must be...

03 February 2021 6,318 5 View

Does Location Map of Informal Settlements in South Africa exist?

I urgently need a map that shows the point locations of informal settlements in South Africa. I am currently working on a study that seeks to relate protests location to the location of informal...

02 February 2021 4,113 7 View

Meta-analysis of different studies that utilise the same public databases for cases?

I am in the process of conducting a meta-analysis assessing effect of adjunct radiotherapy on overall survival. Some of the final studies included for analysis use the same national databases for...

02 February 2021 9,211 2 View

What can I do if DNA OD260/280 is either 1.6 or higher than 3?

26 January 2021 7,830 4 View

Any suggestion on the methodology for Soil depth and ph mapping using machine learning ?

Hello, Please, I need your opinion. I want to map the depth of 20,000 hectares of land. I have sampling points of 20,000 with their respective depth attributes and photos of the topsoil(less than...

31 December 2020 4,325 3 View

How To Determine Raster-Based Path Radiance?

I am working on aerosol retrieval using a radiative transfer equation with Landsat 8 OLI, and I am having difficulty determining the raster-based path radiance. I am using the formula by Felix C....

11 December 2020 6,662 2 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Can any one explain why the ethyl ester Biodiesel (FAEE) has higher than that of the metyl ester FAME- both of them are derived from the same oil?

Biodiesels derived from waste vegetable oil transesterification with Ethanol (FAEE) show higher peroxide values than those derived by transesterification with methanol (FAME) prepared under the...

13 February 2021 193 6 View

Is ANSYS Fluent good for simulation of a three phase reactor(stusy of its hydrodynamics or mass transfer...)?

Hello everybody, I would like to simulate a three phase reactor and study its hydrodynamics. I would like to know which type of software is better? I have a good command of ANSYS Fluent and I am...

10 February 2021 4,303 3 View

Does anyone knows about a comercial software to record pressure and temperature during reaction in an Autoclave?

Dear all: Currently I am working with polymerization reaction in a reactor. For this, I need to control temperature, pressure, agitation speed etc. For calculation of rate of polymerization, I...

07 February 2021 355 2 View

Why are readings on an Eppendorf BioFlo 120 bacterial bioreactor lost after a few hours?

Hello all, Our lab has a bacterial bioreactor from Eppendorf (BioFlo 120) that is normally set to read/record trend data (pH, temperature, etc.) over a set number of hours (overnight). We...

26 January 2021 8,192 1 View

How to de-clump HEK293 suspension cells?

I have a problem with clumping of HEK293 suspension cells, and this clumping problem decreases the cell viability. I will transfect the cells if I were to reach a favorable cell count. What can I...

17 January 2021 354 4 View

Why there is no increase in virus titer after 24 hour of seeding for harvest?

I am working on virus production through bioreactor,my concern is regarding ,no increase in virus titer after 24 hour of seeding for harvest Usually we seed the fermenter and incubate for 72...

05 January 2021 3,860 2 View

Which one is the novel method for the recycling of grey water irrigation?

Recycled vertical flow constructed wetland (RVFCW), Membrane bio Reactor or simply constructed wetland.in small communities and household, please mention with description

30 December 2020 6,258 4 View

What is volume of gas sample to be injected into GC for analysis?

I'm currently working on a batch type gas phase photocatalytic reaction. For product analysis, i draw the gas samples from the reactor using a gas tight syringe and then inject directly into the...

22 December 2020 6,850 2 View

Best Way to Preserve Nitrifying Bacteria in Liquid Culture?

I have a heterogeneous culture of nitrifying bacteria that was originally isolated from the field. It has been kept alive for several months in a bioreactor. I want to pull some of this...

18 December 2020 5,411 4 View