I am interested in working on a coin cell aluminum ion battery, I have a question about assembling an Al coin cell. could you please arrange its pieces, i.e.( large cap, active material, separator, electrolyte, Al anode, spacer, and then small cap)
is this arrangement right?
Yes, that is right. Anyway what is electrolyte you use for coin cell arrangement for Aluminum-ion battery? Thanks
So, did it corrode the stainless steel and interfere with the electrochemistry?
Andre Lammiduk Lubis the electrode that matched with the spacer was corroded, and the ocp always shows ( 0.9-0.8) V
is it working well or not? Wedad A. Alwesabi . I never use the coin cell for AIB since the electrolyte is easy to corrode the SS.
Andre Lammiduk Lubis: It worked for a few cycles with good capacity and then stopped. In our lab, they work with sodium ions, so they only use coin cells. That is why I use the coin cell with Al-ion. Now, I tried to remove the spacer, and instead of it, I used four separators to fix the coin cell. I found the voltage rose to 1.3V as OCP. I am in a battle with this battery!...
- Badges
- Science topic
- Similar topics
- Filing