GaN HEMT Simulation question in sentaurus TCAD?

19 March 2023 0 10K Report

When I use Sentaurus TCAD to simulate GaN HEMT, If I use a hydrodynamic model, I can obtain ideal results, but the temperature does not change. When I use Thermodynamic model, I cannot obtain ideal results. Is there a way to combine the two?

Badges
Science topic

More Jiaxu Wu's questions See All

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Does any one can help me choose a reasonable basis set for intermediate metal ions interactions with guanine (i.e Fe2+, Mn2+, Cu2+ and exc.)?

Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...

01 March 2021 6,187 2 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How can we theoretically calculate Elemental analysis(percentage) of atoms in covalent organic framework?

For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...

24 February 2021 1,265 6 View

Is there any teachers based in UK who would like to take part in my study?

24 February 2021 4,833 3 View

Inpatient DBT to reduce parasuicidal behaviour?

Currently trying to obtain as many pieces of research as possible for my dissertation around the implementation of DBT within the inpatient unit for those with a diagnosis of BPD. Primarily...

23 February 2021 5,654 2 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Alginate and silk fibroin hydrogels toxic to cells?

Hello, I asm currently working with alginate and silk fibroin hydrogels. I prepared a blend of alginate and aqueous silk fibroin (straight from dialysis) and resorted to ionic crosslinking to...

23 February 2021 8,249 2 View

How can I plot surface potential vs Gate voltage in Sentaurus TCAD?

Currently, I am working on a project in Sentaurus TCAD for which I required the plot of Surface Potential Vs Gate Voltage. Can anyone help me finding the simplest way or a different procedure for...

18 February 2021 1,213 2 View

Vth increase with programming SONOS Flash in Tcad?

Hello, I've been working on this issue for more than a month now.... I made a basic SONOS flash structure using TCAD Sentaurus sProcess. (tunnel oxide/nitride/blocking oxide : 4/6/6 [nm]) Then,...

11 February 2021 3,337 3 View

What are the merits and demerits of GAN and classical data augmentation in plant leaf disease detection and classification systems?

anyone suggest what are the merits and demerits of GAN and classical data augmentation in plant leaf disease detection and classification systems

21 January 2021 5,135 5 View

TCAD Simulation how to extract charge in electrode?

Hi, I am newbie in synopsys TCAD. I want to extract the charge information in electrode during transient simulation. I have seen this in TCAD Manual that I can get charge info from .plt file as...

21 January 2021 7,079 2 View

Is there a way to extract scalar and vector field data from Sentaures into a separate txt file to plot it in other software?

I have TDR file, which contains binary data that can be read using Svisual, a tool from Synopsys Sentaurus tool collection. I want to extract the vector and/or scaler fields such as Temperature...

05 January 2021 2,436 3 View

GAN as Data Augmentation?

Hi, I want to apply GAN as a data-augmentation technique in my model. I am bit confused regarding implementation that how could I give the generated images of GAN to my model on run-time? because...

07 December 2020 4,703 3 View

How to simulate Hetrojunction(SiGe Channel) finfet using matlab is it possible?

17 November 2020 193 3 View

How can I simulate noise of CMOS Image Sensor by sentaurus TCAD?

Can anyone tell me how to simulate noise of CMOS image sensors, such as thermal noise and flicker noise with sentaurus TCAD?

09 November 2020 9,616 4 View

Can anyone tell me that how to find dangling bond in GaN, AlN or AlGaN?

I want to know about the dangling bond? by which method we can find it, does its need some special type of characterization just like XRD etc... or method i want to find dangling bond effect in...

26 October 2020 1,938 6 View

Journals to submit articles on semiconductor device simulation algorithms?

What are the journals best suited for submitting articles about semiconductor simulation device algorithms? For my specific interest, this would concern TCAD simulator algorithms, which solve...

17 September 2020 1,786 2 View