Function in Scilab similar to Matlab xlswrite ?

Praveen Kumar Kuppusamy @Praveen-Kuppusamy

26 April 2018 1 5K Report

Hi,

Similar to Matlab xlswrite(filename,A), what is the function name in Scilab to write on a new excel file ? I tried searching, but couldn't find out. There was only write_csv available.

Thanks,

Praveen

Thomas Pursche

Hello Praveen,

Scilab has the opportunity with xls_read and xls_open to import files from excel. By using write_csv you are able to write data in a an excel file.

https://help.scilab.org/doc/5.3.3/en_US/xls_read.html

https://help.scilab.org/doc/5.3.3/en_US/write_csv.html

With best regards,

Thomas

Badges
Science topic

More Praveen Kumar Kuppusamy's questions See All

How to carry out survival analysis of a one time use machine which is stored and tested at regular intervals for functionality?

I want to carry out reliability study of a machine with various sub components both electrical and mechanical. The machine is a one time use (similar to a decoy or rocket) and is stored at...

30 June 2024 2,435 0 View

Is there any home portable biowaste manager ?

home based bio waste management

02 June 2024 8,590 4 View

How to develop a flat panel display glasses ?

Dear friends, I am looking to develop a new project for the applications of displays using float glass. How and what process is needed to develop such flat panel displays what are the ideas and...

09 May 2024 3,233 0 View

How do we control pin holes in the coated thinfilms by using large area magnetron sputtering techniques?

Dear ResearchGate colleagues, professors, and scientists, I'm encountering challenges with coated thin films produced using a sputtering system. Following treatment through tempering at 650...

11 February 2024 3,585 4 View

Please recommend the proper way to calculate the ratio of the mixed gas of NO+N2, air, and water vapor for the NOx study?

Hello everyone. I am trying to analyze the NOx study for my cementitious TiO2 material. According to the ISO standard, I have to follow 1000 ppb and 3 L/min of working fluid. In my case, I have a...

17 January 2024 7,266 0 View

PLGA Microspheres. Alcohol or ester terminated polymers?

I have read a research paper "Development of a novel morphological paclitaxel-loaded PLGA microspheres for effective cancer therapy: in vitro and in vivo evaluations". I want to synthesize PLGA...

13 December 2023 9,857 1 View

Hello everyone, I am working on medicinal plant. How can i perform Principal components analysis?

I have done metabolite fingerprinting of plant extract using LC-MS and GC-MS.

29 November 2023 4,511 3 View

Are Geochemical Weathering and Pedochemical Weathering distinct processes?

They seems synonymous terms describing the same phenomenon.

24 October 2023 4,332 0 View

How to Deposit titanium nitride layer with x varies from 0.8 to 1.2 using sputtering coating ?

I am looking to deposit a single-layer titanium nitride layer with a sheet resistance of approximately 60 ohms and a layer of TiNx (x value should be in the range of 0.8 to 1.2). The developed...

22 October 2023 7,594 4 View

What is the name open source software for LC-MS data analysis?

Please mention name of open source software

02 October 2023 2,301 3 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Is it true that $\det(V(A))$ may be only $\pm 1$, depending on $n$, for the last symmetric tridiagonal matrix $A$?

One can try to generalize the Vandermonde determinant in the following direction: Let $A$ be any symmetric $n$-order square matrix. Consider its powers' diagonal elements $(A^k)_{ii}$ and...

08 August 2024 6,690 1 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View