Does ELISA work on short peptides and is there a minimum peptide length for it to work?

The shortest peptide in question is 9 amino acids long

08 December 2014 6,071 4 View

Can anyone suggest me a suitable solution for electrospinning of chitosan/PVA/Zeolite composite?

I am using 90% acetic acid as solvent. When I did Xrd of the fiber got some peaks for sio2 . I think some zeolite converts to it. I want to avoid it

15 November 2014 1,984 5 View

Is it possible to know the amount of different phases by XRD?

My Sample is Chitosan/PVA/TiO2/ Na-Titanate. I want to know the ratio of TiO2/ Na-Titanate by XRD

14 November 2014 4,883 23 View

How to know the weight percentage of filler mater in a polymer matrix composite

I need to know the zeolite percentage in electrospun membrane

13 November 2014 276 6 View

How to electrospun the protic ionic liquid?

I want to know approximate solution or polymer which will help to electrospinning of ionic liquid

13 November 2014 5,245 2 View

Gaining policy priorities for the post care of abused children in Nigeria

Please help me with related articles or where i can find materials for this project. Thank you

01 January 1970 8,716 1 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View

How to measure angle between laser travel path and machine axis in Laser Measurement system?

25 February 2021 1,987 3 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How to improve the adhesion between germanium and silicon monoxide thin film layers using EBEAM evaporation?

I want to deposit multilayer coating of germanium and silicon monoxide on silicon wafer using ebeam evaporation?

21 February 2021 2,141 3 View

How can I measure the thickness of thin layers deposited on textured glass susbtrates?

I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.

21 February 2021 5,465 4 View

How do I calculate absorption coefficient of my thin film if I dont know the thickness? Or how can I calculate the thickness of my sample?

I have done Uv-vis characterisation of my thin film and have received absorbance and transmittance data. Now I want to calculate the absorption coefficient but I dont know the thickness of my...

21 February 2021 7,148 8 View

How to construct different filler shape in MD simulations?

Is there any way to construct different initial filler shapes like triangle, square, rectangle, pillar, and tube in any simulation software.

20 February 2021 1,750 1 View