Hi friends! I ran my project successfully, however there are some reservoirs in my basin. Hence, I have to rewrite data again and set the reservoir parameter up.
Unfortunately, I don't work and the text box show that my reservoir area and volume have to be less than a number (I showed in the picture below). Meanwhile, my real reservoirs are larger than that number.
Does anyone get the same problem with me?
Your answer will be a big help for me. So many thank!
To allow higher values of reservoir data, you have to change the limits of these parameters in the 'resrng' table in the database 'SWAT2009.mdb' or 'SWAT2012.mdb' whatever version you are working in. Otherwise directly change the values in the your project database, instead of using the GUI in ArcSWAT.
So many thank for your reply, Mr. Raktim
I tried doing that but it still informs another problem. I guess that problem comes from the discharge file format (I attached mine here with the error box from SWAT).
If you know how it is, please tell me.
Thank in advance!
Yes, this error has different reason than earlier reservoir volume and area. I cannot help regarding this. If this is Thacmo reservoir discharge you are using then look up correct format for the discharge file in the C:/SWAT/ArcSWAT/databases/ExInputs/resdaily.dbf
Dear Raktim Haldar,
Really thank for answering my questions. It worked!
May I know what software can be used to open/edit/save a dbf file?
Thank you.
Alicia Chong So sorry friends, I just read your question now. I suppose that you've already known the answer. However, I write here to help the other persons who have the same question.
You can use the access function of Microsoft to open/edit/save a .dbf file.
- Badges
- Science topic
- Similar topics
- Engineering
- Modeling