http://aml.jlu.edu.cn/Htdocs/bd/jq/article/ss06.pdf

https://ceramics.org/wp-content/uploads/2013/03/06-appendix-b.pdf

https://mpc-www.mit.edu/component/k2/item/536-modeling-solid-state-thin-film-dewetting

https://www.iod.krakow.pl/uploads/12456618815ab6d81ec.pdf

http://www.tms.org/pubs/journals/JOM/0001/Asthana/Asthana-0001-text.html

Dear friend! What does it mean surface properties? May be you can explain in details in private letter? If you want to know about hydrophobicity of your sample, you can measure wetting angle( see manuals of molecular physics or colloid chemistry)

Dear Dr. Mnatsakanyan think you for response. Actually the "surface properties" term is really to general and probably it had better to point out exact what I am looking for. The property which is under my interest is hydrophobicity or surface energy. In fact I used to measure wetting angle and know that approach very wel. Alsol I do know my materials' properties. However depending on fabrication conditions the surface property (i.e. hydrophobicity) is varying. So I need literature data as reference. 

Dr. Banhegyi shared very nice data and I appreciate it very much. 

Hi Dr Hayk, very likely you can not find table for commercial materials since there are thousands of variation of certain material depending material fabrication method / propose / composition / surface roughness, etc. You need to ask to producer / distributor directly, my experience makes me think that even in this case the information provided by producer is not very correct and applicable. 

Dear HayK!!!

I and Alina say that surface properties you can know just by your own measurements because surface properties can change during time and data which you can obtain from producer   also   may change.

Best regards