Discrepancy in EDS results ?

sanjay mohan Sharma @Sanjay_mohan_Sharma

11 November 2015 0 5K Report

Is it possible that after performing EDS test on metal composite, carbon content was very much higher than what was initially added to the composition.

Badges
Science topic

Similar topics
Chemistry
Carbon

More sanjay mohan Sharma's questions See All

How does flow stress influences increase in porosity ?

What are the various reasons for increasing porosity in powder metallurgical composites?. And how flow stress relates to porosity.

03 April 2018 7,843 3 View

Does addition of zinc stearate to metallic powders of iron, copper, aluminium etc in Powder metallurgy brings in problems?

In powder metallurgy stearates are added while mixing of powders in order to facilitate compaction. Further these stearates are removed during dewaxing. If zinc stearate is added as a lubricant...

01 February 2017 1,298 5 View

How to read oxidative wear in SEM image?

While undergoing wear testing of sintered composites at high temperature, how to read oxidative wear in SEM images

10 November 2016 6,607 2 View

Compressive strength of Composites at high temperature?

I wanted to know the approximate reasoning for the decrease in compressive strength of Fe based composite at high temperature (500 degree Celcius).It would be a kind gesture if some one provides...

09 October 2016 6,017 3 View

Complete details of certain refrence?

Kindly apprise me about the complete details of the article titled 'Self-lubricating sintered composites with hexagonal boron nitride and graphite mixtures as solid lubricants'.

06 July 2016 5,206 3 View

Porosity?

What is the easiest way to calculate porosity in sintered alloys.

03 April 2016 8,093 7 View

How to calculate relative density?

In case certain reinforcements of same kind is done in some base matrix in order to know the change in porosity of the reinforced materials with respect to the base matrix, then while...

03 April 2016 6,449 4 View

Location of Oxides formed on Iron based material?

It would be humble gesture if some one could confirm the formation od oxides in the attached SEM image as it is the image of sample tested for wear at 500 degree celcius

02 March 2016 8,573 2 View

How to calculate wear rate?

If some one can clarify as to what formulae is best for calculating wear rate in case of composites.

02 March 2016 6,458 17 View

Can iron oxides such as Fe2O3, Fe3O4 be used as solid lubrication?

Iron oxides possess good hardness and is it possible that these oxides help in reduction of friction at 500 degree celcius

02 March 2016 3,160 8 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

How can I find access to heavy metal reference doses from the EPA and WHO websites?

Reference dose and Maximum acceptable concentrations HMs

03 August 2024 8,230 4 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

What is the best method to detect the chemical composition of pollen ?

I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?

28 July 2024 5,331 1 View

What are the perfect mathematical model for a solar-powered ship implementation?

A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids

28 July 2024 4,985 1 View