Despite single-cell RNA, how can I characterize a new cell subtype/phenotype?

A new cell subtype was found out only during regeneration phases after a cuprizone-induced demyelination model. How can I characterize this cell? It is important to highlight that was already...

13 February 2021 1,245 1 View

How do I prepare and store insect samples for JH measurements?

I need to preserve termite samples for future quantification of juvenile hormone in their bodies. Or extract the Juvenile Hormone and keep that samples stored for future quantification. I may need...

09 February 2021 1,995 1 View

How to measure beam radius over some distance in Lumerical fdtd (Collimation evaluation)?

31 January 2021 6,354 2 View

Can someone explain why a methyl in phentolamine mesylate presents two correlations for 13C-HSQC, around the region it should appear?

Instead of appearing one single correlation of the signal of the carbon at 20.9 ppm (#11 in the attached figure), aligned to hydrogen at 2.29 ppm, it appeared two correlations (2,32 and 2,26 ppm)....

16 January 2021 4,774 2 View

What is the best method for removing power-line interference (PLI)?

In the paper A wavelet-based method for power-line interference removal i... we propose a new method for removing PLI. This method consists in identifying the ECG and noise frequency range for...

29 December 2020 9,233 3 View

Have you done or thought about doing an article about the impact of covid 19 in your research / work area? If so, which one?

Have you done or thought about doing an article about the impact of covid 19 in your research / work area? If so, which one?

27 December 2020 3,777 12 View

How to simulate the magnetohydrodynamics (MHD) phenomena in COMSOL? What is the best way to learn how to use COMSOL?

I would like to simulate the Lorentz Force resulting from the magnetohydrodynamics (MHD) phenomenon in an ionic solution.

19 December 2020 8,278 9 View

Are there any way to make the comparison between different analysis of reliability possible?

10 December 2020 7,922 4 View

Code: JavaProp Automation for MATLAB?

Hi Mr. Waugh! I'm using your code for JavaProp Automation for MATLAB on my thesis. How can I correctly reference it? Thank you!

09 December 2020 8,316 1 View

How to know if 87Sr/86Sr is reliable for Sr isotope chemostratigraphy in marbles?

I am currently looking for parameters to know if 87Sr/86Sr data is reliable for chemostratigrahy in marbles, and/or parameters to know if those marbles have had some post-depositional...

30 November 2020 9,032 8 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to remove DCU and HOBT from my reaction?

I am doing a acid and a chiral amino alcohol reaction using DCC and HOBT in DCM or THF? Can anyone suggest me how to remove DCU and HOBT from a reaction mixture??

28 February 2021 2,153 1 View

What is the most common number of epitopes in an multi-epitope Vaccine?

hi everyone, I'm interested in the field of vaccine design specifically multi-epitope cancer vaccines , I want to know if there is a minimum and maximum number of epitopes we could use in a...

27 February 2021 3,882 3 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is it efficient to do liquid biopsy to investigate the gene expressions of the tumor?

To do liquid biopsy and look for specific gene expressions there are so many published papers. Thera are different protocols and procedures used to isolate circulating cell free RNA or mRNA from...

23 February 2021 7,326 5 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

What is the biochemistry of acidic solvents for phenolics extraction in strawberry?

I am using the Folin-Ciocalteu method for analysis of total phenolic content in ripe strawberries. I've read several protocol that suggest a methanol/H2O/formic acid (80:19:1) extraction solution....

22 February 2021 6,560 3 View