Could anyone provide me with an ICDD card number 01-073-6109?

More Kapil Sood's questions See All

Can we quantitatively identify level of ordering in a solid amorphous phase to explain its ionic conductivity with temperature?

I have doped Na at Sr site in SrSiO3 using solid state reaction method and found two phases i.e one crystalline phase i.e. SrSiO3 which is insulating and other is Na2Si2O5 which is amorphous and...

05 June 2016 8,462 6 View

Can we quantitatively estimate the volume fraction of crystalline phase (SrSiO3) and glassy phase (Na2Si2O5) by Raman analysis in synthesized sample?

We have synthesized Na doped SrSiO3 using solid state reaction method. Since XRD indicate only crystalline phase and there is possibility of glassy phase (Na2Si2O5) formation along with...

31 December 2014 4,068 5 View

How can I evaluate a Raman mode (386cm-1) for LaInO3 at 386cm-1 is symmetric or antisymmetric stretching vibration?

I have synthesized Ca-doped LaInO3 system. From the Raman analysis, I found the highest intensity peak at 386cm-1 which is due to In-O-In streching mode. How can I know that it is a symmetric or...

11 December 2014 9,552 14 View

Can you suggest the most compatible electrodes (anode +cathode) for LSGM solid electrolyte for SOFC applications?

I am planning to work on compatibility and interaction study on LSGM with different electrode systems. Please suggest the suitable electrode materials and review papers on this.

08 September 2014 326 1 View

How much R-value is acceptable for Rietveld refinement in a polycrystalline solid?

I have synthesized a polycrystalline solid using a solid state reaction method and refined the XRD data using FULLPROOF software.

05 June 2014 7,656 4 View

In XRD, why does the sharpness of (200) and (020) planes in LaGaO3 suddenly diminish with Ca doping?

CaO is doped at La site in LaGaO3 using solid state reaction method. During powder XRD analysis, the undoped sample (LaGaO3) was matched with ICDD card 01-089-7833 and it consist of sharp peaks...

04 May 2014 3,521 8 View

Why is there a difference between the initial value of conductivity in DC measurement and conductivity value during AC measurement?

I am trying to measure DC and AC conductivity of Ca doped LaInO3 samples and wish to separate the electronic from the ionic contribution. I assume that initial value of conductivity in DC...

04 May 2014 5,236 4 View

Does gold sputtering in electrolyte samples (disc-shaped) interfere during AC conductivity measurements?

I used gold sputtering (to make electrode contacts) in Ca doped LaInO3 samples for AC conductivity measurement from room temperature to 800C. Does it interfere with the conductivity response of my...

04 May 2014 2,391 2 View

Why does a Perovskite structure appear on the 180 cm band of Ca doped LaInO3 in raman spectra?

This structure was synthesised by the solid state reaction method.

03 April 2014 6,429 2 View

Why is red shift in raman bands from 180-300cm-1 obtained when Ca is doped in LaInO3 perovskite?

Ca doped LaInO3 samples were synthesized using solid state reaction method. 5mol%Ca shows maximum red shift(3cm-1) for 180cm-1 band. With further doping, lesser red shift is obtained. Also, The...

03 April 2014 9,351 3 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View

Matteo Leoni

...unfortunately providing the info here violates some ICDD rights.. did you try by chance looking for other possible sources of information (e.g. the internet)?

http://www.jcrystal.com/steffenweber/jpx/jpx/AM_CaGa2O4.htm

Kapil Sood

I just need to know the space group mentioned in theICDD card 01-073-6109?