can anyone introduce me some paper which calculate the conductivity of graphene and graphene nano ribbon in the presence of parallel electric/magnetic fields?
Hello Nima,
here is the theory:
http://journals.aps.org/prb/pdf/10.1103/PhysRevB.80.075417
and here is the newest measurement, including Geim and Novoselov:
http://arxiv.org/pdf/1602.01681v1.pdf
Best wishes and I hope that helps,
Lukas
thank you Lukas.
is there any reference for the transverse electric biasing of graphene / graphene nanoribbon?
best regards.
Can anybody please help me to run a global macro (e.g. Run Macro>> Materials>>Define Human Material Properties) from matlab? in CST help there is a command RunMacro ( string...
05 June 2019 2,080 1 View
In boundary value problems like scattering from wedges, the scalar wave function is written by Bessel function and the Hankel function is left out due to the irregularity in the origin while the...
10 November 2017 9,799 2 View
I have 2 problems about local coordinate system in Comsol. 1. how to offset my coordinate system? 2. how to assign local coordinate system on a deformed shape like a bump? I think the boundary...
10 November 2017 4,317 3 View
Can anybody tell me how to determine microstrip line width for feeding patch terahertz antenna on PBG (Photonic Band Gap) substrate with holes? Also I want to know which port to use for excitation...
08 September 2017 293 3 View
I want to write a RCWA matlab code for calculating reflectance and transmission of TM polarization wave from a simple binary grating. the attached code is based on the paper by Moharam...
11 December 2016 6,480 5 View
I extract surface current density in CST and I want to take the divergence of it in matlab. but I do not know in what way CST sort the mesh information in the extracted text file. Can anyone...
11 December 2016 8,328 0 View
I am simulating the absorption from a corrugated grating with infinite substrate in cst microwave studio. I put boundary condition along grating vector and the other dimension perpendicular to the...
08 September 2016 5,434 4 View
I want to get the ACS of the stricture in cst that I have attached below but I get this error, Time Domain: bad result normalization. also it give me the results but I don't know are these results...
07 August 2016 8,050 0 View
can anyone explain me what is strain fields in graphene? also when this effect must be included?
03 April 2016 7,650 4 View
I want to know beside edge effect on electronic transports, does it affect the nature of plasmonic waves, the graphene nanoribbon support or not? because as I know the conductivity is influenced...
02 March 2016 5,974 0 View
Hello, I am working on the photocatalytic degradation of PEG 400. I would like to know if it's possible to determine the degree on polymerization based on NMR integration, or by the MW of the...
02 March 2021 6,186 3 View
I would like to research on MR images (0.5T and 3T). Can you please suggest some websites that I can download dataset including both 0.5T and 3T MR images? Thank you.
02 March 2021 7,735 3 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
Im doing PBMC isolation -> CD14+ enrichment using magnetic beads -> stimulation setup. My negative control is just cells in cRPMI but they seem to get activated over and over again.
28 February 2021 7,883 3 View
hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...
27 February 2021 734 4 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
Dear colleagues We are exploring possible data collection methods for environment and behavior research in the context of architectural environments. Have you conducted any Post Occupancy...
16 February 2021 2,575 4 View
Unlike graphene, it is usually very difficult to exfoliate few layers (~10 nm thick) of hBN on SiO2 substrate due to lip-lip interaction at the edges. Au substrates have been proven very useful...
16 February 2021 2,635 2 View
Hi there, I've been using the EVOS Auto II microscope for some time now and usually I will save the transmitted light/bright field image and the images from fluorescent channels as separate...
15 February 2021 546 3 View