What are the key points to remember while writing review articles ? What will be the permitted plagiarism limit for a review article ?

Dear researchers If a budding researcher wants to write the review article for the first time, what are the key points to remember while writing the review article ? what will be the permitted...

30 December 2020 7,645 4 View

How to set Time and LUX values in AC PIR Sensor?

AC PIR Motion Sensor, how to set and change the time and sensing coverage area, my sensor setting requirement time 5 seconds, coverage area maximum 1.5 meters.

19 August 2020 5,015 2 View

Determination of wavelength in Raw effluent?

Is there a procedure to determine the wavelength of an industrial untreated raw effluent using spectrophotmeter

24 February 2020 1,931 3 View

PEG-400 or PEG-4000 can be used as an alternative to PEG-1000 ?

I use PEG-1000 (poly ethylene glycol) in my synthesis process, but I only have PEG-400 and PEG-4000. So, what is an alternative to PEG-1000 ?

19 February 2020 2,142 3 View

Is it safe to use DMF as solvent in electrospinning without extraction from the lab? Will it be toxic to the lab-users?

Further, if we extract the DMF vapors during electrospinning, can I freely force them in environment?

18 February 2020 6,939 2 View

Why is there an unrealistically low PM2.5 concentration estimated using WRF-Chem V3.9.1?

I am conducting experimental simulations to study the PM 2.5 concentration.I have tried several chemistry options ranging from RADM2 MADE/SORGAM to MOZCART aerosol chemistry. The simulation...

21 October 2019 8,154 4 View

What are all the possible reasons for Spontaneous symmetry breaking in a double quantum well system?

Dear frnds, From my point of view SSB is happening due to following reasons in double quantum wells. 1. Due to variational technique 2. symmetry in envelop function and...

19 October 2019 6,248 2 View

Can we consider hemagglutination assay for dengue virus as a quantitative method???

For a pure virus, HA can be considered as a way of representing their titre. even though it is cost effective and less labor intensive, it is less concerned. Kindly guide me in this matter.

04 July 2019 3,881 1 View

What is the significance of size dependent dielectric screening in optimizing excitonic properties?

Mott-Wannier excitons are formed in a semiconductor material as a result of light-matter interactions. However, their delocalizing properties inside the crystal induce screening effects in their...

10 February 2019 6,737 1 View

What approach can be used to teach fraction concepts and the approach need to be based on constructivism theory?

Hi I need help for my thesis. My thesis is about teaching fraction concepts for primary pupils and I struggling to identify the appropriate constructivism learning approach.

17 June 2018 5,152 8 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

No title

01 March 2021 3,905 5 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

Which group formation theory do you recommend for projects that aim to bring together entrepreneurs for training for regional development?

I would like to have ideas about which theories of group formation are suitable for entrepreneurial training projects, with the aim of creating bonds, building trust, and collaboration for...

28 February 2021 4,223 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

What is the most common number of epitopes in an multi-epitope Vaccine?

hi everyone, I'm interested in the field of vaccine design specifically multi-epitope cancer vaccines , I want to know if there is a minimum and maximum number of epitopes we could use in a...

27 February 2021 3,882 3 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

What could be the reason for not having further low chi square value (better agreement) in my refinement result?

I have tried every combination of parameter changes and after that i have a poor chi square value. I can't get it lower any further. I know there have been a lot of discussion about Rietveld...

26 February 2021 8,480 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View