In ansys FLUENT, Iteration is not moving further?

More Saravana Kumar Tamilarasan's questions See All

What is the relationship between the threshold voltage and the device's noise performance, particularly in terms of flicker noise and thermal noise?

The threshold voltage (Vth) of a MOS device plays a crucial role for its operation. At the same time, noise is an intrinsic factor. So how noise (flicker or thermal) change with the change in...

29 July 2024 3,246 0 View

How to interpret results of AST for Pseudomonas aeruginosa?

While doing AST for Pseudomonas aeruginosa, after incubation, no zone of inhibition observed in the plate near the well. wells surrounded by bacterial growth, when the same plate observed under UV...

25 July 2024 9,229 1 View

What is the solvent system required to run tlc for calixarenes?

If you don't understand my question let me know

21 July 2024 563 1 View

Sample size for qualitative study?

I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...

20 July 2024 9,153 11 View

How to convert available phosphorus to total phosphorus?

I need to convert Available phosphorus into total phosphorus

18 July 2024 6,799 3 View

Can it is possible to find the cleaved sequence when a protein cleaved by a heamaglutanin protease (HA/P) by any bioinformatics tools?

Bioinformatics tools like peptide cutter

15 July 2024 6,453 1 View

Can we progress towards defining obesity based on body fat content?

The burden of obesity is enormous. The greater challenge lies in accurately diagnosing obesity at the right time, reflecting the true increase in visceral fat. BMI may not accurately represent...

14 July 2024 8,771 4 View

How does high humidity affect the growth and development of crops?

10 July 2024 7,258 20 View

In what ways does high humidity impact the pollination process in agricultural plants?

10 July 2024 7,513 13 View

Do the parts of the body that are situated at a longer distance from the central nervous system have the least control & coordination comparatively?

What would be the effect of distance from CNC cum Heart on the structure and function of a particular part of the human body? Do short people have evolutionary advantages to control body parts in...

09 July 2024 2,052 3 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

AUX gas reading problem on QE with full MS and PRM method in one run?

Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...

06 August 2024 4,953 0 View

People weight in Oaxaca Blinder Decomposition on R?

Hello guys! Do you have experience running a Oaxaca-Blinder decomposition on R applying person weights. How do you suggest doing it? I have a variable PERWT which gives more information on how...

04 August 2024 6,033 0 View

Challenges Faced by Freshers in IT Sector Recruitment?

i need to know what the key factors that the freshers are facing to get into the recruitment process, explain me clearly

31 July 2024 6,872 2 View

How to perform EEG source analysis on each trial of data separately?

Hello Everyone I have a question about structure for connectivity analysis on sources. My goal: preprocess and cut data into trials create headmodels, using template MRI file perform source...

30 July 2024 2,744 1 View

How to add Cr parameter in autodock?

When I run autogrid4 it says: autogrid4: ERROR: Unknown receptor type: "Cr" -- Add parameters for it to the parameter library first! Look forward to your reply.Thank you so much!

29 July 2024 488 0 View

Why running a restart analysis in Abaqus in Ubuntu OS gives an error as attached when running the same job in Windows doesn't give any error and runs?

I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...

29 July 2024 9,572 3 View

Tangential stiffness option in ansys workbench?

I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...

29 July 2024 2,032 2 View

How to use Desmond in HPC ?

Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...

28 July 2024 6,553 1 View

What are the most effective strategies for integrating sustainability in your expertise?

What challenges do you think businesses or entities face in implementing these strategies? Thanks

28 July 2024 2,125 14 View

Timileyin Akande

In ANSYS FLUENT, encountering a situation where the iteration progresses up to a certain point (e.g., the 88th iteration) and then stops loading, preventing further progress, can be attributed to various factors. Several common reasons and potential solutions for this issue include:

Mesh Quality: Poor mesh quality can lead to convergence difficulties. Ensure that the mesh is well-structured and refined in critical regions. Use mesh diagnostics in FLUENT to identify and address any mesh quality issues.

Solver Settings: Evaluate the solver settings, such as turbulence models, numerical schemes, and solution methods. Inappropriate settings may hinder convergence. Experiment with different settings to find a combination that facilitates convergence.

Initial Conditions: Verify the initial conditions for the simulation. If the initial conditions are too far from the expected solution, it might hinder convergence. Use reasonable initial conditions to aid the convergence process.

Memory Limitations: Insufficient system memory can lead to simulation stalling. Monitor the memory usage during the simulation, and if it approaches the system limit, consider refining the mesh, reducing the problem size, or using parallel processing if available.

Software Bugs: Check for any known bugs or issues associated with the specific version of ANSYS FLUENT you are using. Software updates or patches may address certain bugs that could be causing the problem.

File Corruption: File corruption can occasionally cause simulation issues. Check the integrity of the case and data files. If necessary, restart the simulation with a fresh set of files.

If the issue persists, reaching out to the ANSYS support community or the official support channels for assistance is recommended. Providing details about the specific simulation setup, boundary conditions, and any error messages encountered can help in diagnosing and resolving the problem more effectively

Saravana Kumar Tamilarasan

I tried and asked many people, sofar no one gave answer..Thank you so much for reply sir, Timileyin Akande

You are welcome sir

I'm available for any collaborative workflow