Can the cyclic nanoindentation technique be used for analyzing the cyclic elasticity/plasticity/hardening/softening or viscoelastic properties of metallic materials? I could not find any research articles on the same (except for thin films!).
Thanking you in advance.
Siva
The following article may help you:
Article An analysis of nanoindentation in elasto-plastic solids
Yes, nanoindentation can be used for cyclic elasticity/plasticity testfor the calculation of percentage of recovery in shape memory alloys, basically for mechanical actuation test.
Thank you so much .for the answers and the article Ajit Behera Sagarsingh Kushwah
I will look for the papers related to the mechanical actuation test as mentioned by Prof. Ajit Behera
Nanoindentation used to detect the shape recovery from the deformed one. In this way actuation property can be measured. Some of the following journals may help you:
https://www.nature.com/articles/s41598-017-13434-9
https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.200900266#:~:text=Nanoindentation%20is%20a%20suitable%20tool,to%20study%20their%20pseudoelastic%20behavior.&text=The%20corresponding%20nanoindentation%20responses%20differ%20considerably%20in%20terms%20of%20pseudoelastic%20behavior.
Article Nanoindentation of NiTi shape memory thin films at elevated ...
https://stars.library.ucf.edu/cgi/viewcontent.cgi?referer=https://www.google.com/&httpsredir=1&article=1491&context=etd
Article Nanoindentation and Microindentation of CuAlNi Shape Memory Alloy
Article Analysis of spherical indentation of superelastic shape memory alloys
Article Calculating the elastic modulus from nanoindentation and mic...
https://www.hindawi.com/journals/scanning/2017/4630156/
etc.
- Badges
- Science topic