04 September 2015 1 8K Report

I'm trying to selectively dissolve polystyrene from polystyrene/PLGA.

When I did that with polystyrene/PCL, I used chilled DMF and it worked very well, PS and PLGA share too many solvents.

Please help. Thanks :)

More Slgirim Lee's questions See All
Could you recommend some articles on Urban Transportation System optimization and Innovation?

Could you recommend some articles on Urban Transportation System optimization and Innovation?

13 August 2024 2,595 3 View

Does anyone know what might be causing the smeared bands on my western blot?

I got these smeared bands quite often lately. We typically run the gel at 140V with a 10-12% gel and do a wet transfer at 220 mA for 1.5 hr in cold room. We also noticed some dirty spots/dots (see...

10 August 2024 7,480 3 View

Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

How to back transform the results generated from analyses using log transformed with In(X+1) data?

I am conducting my analysis using SPSS. I log transformed my data using In(X+1) as my data contain zero values. However, when I want to back transform the regression coefficients generated from my...

31 July 2024 7,860 3 View

Is artifacts in XPS possible to build high deviation in binding energy larger than 5 eV??

Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...

30 July 2024 9,824 2 View

Could you try using PeptiCloud and see if it's a useful tool for biology research?

PeptiCloud (www.pepticloud.com) is a bioinformatic platform that allows researchers to organize and share their data for their projects as well as collaborate with others in one place. Through...

28 July 2024 4,762 2 View

Are these cassettes suitable for expressing PETase mutant in E. coli?

I created two potential gene expression cassettes (constitutive and inducible) for expression of a mutant PETase gene on PeptiCloud using the version tree feature, which allows users to create...

28 July 2024 7,559 1 View

How can i solve the code problem in Sentaurus TCAD?

Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...

24 July 2024 6,352 0 View

Is measurement of oxygen uptake rate dependent on the DO concentration in the sample?

One problem w the BOD bottle type of OUR measurement is that it can only be used in a system that is not DO limited (typically assumed about 2 mg/l or more). If the system is running at low DO and...

01 July 2024 1,282 2 View

IPA PhD Thesis. Word Count?

I am finalising my PhD and my word count is far greater than the faculty expect [80-100 K] Has anyone on here successfully submitted a PhD with a wordcount in excess of 120 K? Thanks in advance

27 June 2024 6,246 0 View

Similar questions and discussions
What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 613 3 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

Which solvent is better to dissolve with secondary metabolites extracted from fungi?

I work on MCF7 cell cell for anticaner purpose and I wa to do drug preperation the drug ( secondary metabolites extracted from Aspergillus) My question which solvent is better with these secodary...

03 August 2024 4,725 2 View

I need to dissolve stigmasterol for an animal experiment, it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent?

Hello everyone, I need to dissolve stigmasterol for an animal experiment, but it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent for stigmasterol?

01 August 2024 7,504 2 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Why methanol and sulphuric acid used in the analysis of polyhydroxyalkanoates (PHA) by GC-MS?

Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?

22 July 2024 1,210 2 View

When making abraxane with Nab tech, why is 9:1 Chloroform&EtOH used as solvents?

Is it the best optimization ratio based on experiments?

22 July 2024 8,170 0 View

Is it possible to manufacture polypropylene sheets using a biaxial process?

I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...

21 July 2024 1,559 1 View

What is the solvent system required to run tlc for calixarenes?

If you don't understand my question let me know

21 July 2024 563 1 View

Do you think Serotonin is Primarily A NEUROTRANSMITTER? Does anyone else like me think this Beautiful Biomarker was repurposed as a Neurotransmitter?

Serotonin (5-hydroxytryptamine, 5-HT) is predominantly known as a neurotransmitter in the central nervous system (CNS), where it plays a crucial role in mood regulation, gastrointestinal motility,...

20 July 2024 3,925 5 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close