can you help me "the effect of social media on irrational beliefs " ?

I would like to work on "the effect of social media on irrational beliefs (Albert Eliss) . the main questions is " Does social media spread and assure irrational beliefs?" do you think it is...

02 March 2019 759 4 View

How can I download the book "optical processes of semiconductors"by Pnkove for free?

I need to download it.

09 October 2017 364 2 View

Does the transmission increased after annealing or decreased for CdSe thin films deposited using Physical Vapor Deposition?

I deposited CdSe thin films using physical vapor deposition.I measured the transmission for as deposited films.Then I annealed deposited films under vacuum for one hour for different temperature.I...

09 October 2016 7,742 4 View

Can anyone help me to figure out the mistake in the calculation ZnS thin film thickness measurement?

I deposited ZnS thin film on glass substrate using CBD and I calculated the thickness using weighing method as a pre calculation of thickness before using the accurate methods.I got an extreme...

09 October 2015 4,269 22 View

Why does the color of Cd(1-x)ZnxS thin film deposited using CBD does not change to yellow as expected?

I deposited the film using CBD ,but it's color does not change to yellow as expected.I changed the ratio of the chemicals but i got only white color not as supposed to be white to yellow color?

02 March 2015 8,578 4 View

Does the energy gap of CdSe thin films deposited using physical vapor deposition technique change after annealing?

I deposited CdSe thin film using PVD technique and I measured the energy gap for the as-deposited thin films and after annealing for different temperature but constant time of annealing.The...

02 March 2015 3,380 5 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

How to improve the adhesion between germanium and silicon monoxide thin film layers using EBEAM evaporation?

I want to deposit multilayer coating of germanium and silicon monoxide on silicon wafer using ebeam evaporation?

21 February 2021 2,141 3 View

How can I measure the thickness of thin layers deposited on textured glass susbtrates?

I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.

21 February 2021 5,465 4 View