Can anybody tell me how to prepare Methyl jasmonate stock and final solution ?

26 May 2022 0 9K Report

I need to prepare 200µM MeJA solution. How can I prepare the stock solution and then the final solution? I have methyl jasmonate 95% in liquid form, made from Sigma-Aldrich company having MW:224.30g/mol.

Badges
Science topic

More Muhammad Waheed Riaz's questions See All

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Is there anyone who experienced with cytotoxic effect of Hoescht 33342 dye?

Is Hoechst toxic to cells? In general, it is known as non-toxic. I am working with dsRED MDA-MB-231 cell line. I applied it for my PDMS-based microfluidic platform, for this reason, I incubated...

26 February 2021 9,119 3 View

Which detection method is better for an ELISA-based assay: colorimetric or fluorometric?

Hello, I am planning to perform an ELISA-based assay to quantify the percentage of genomic methylation (5-methylcytosine) in human embryonic stem cells. I've been searching for some kits and I...

16 February 2021 8,389 3 View

Would bisulfide sequencing result be affected if the tissue is fixed by perfusion?

I am looking into DNA methylation of mice as an aging marker along with other assays and recently I added brain IF to the list of assays. For this, I need to fix the brain by transcardial...

09 February 2021 9,012 3 View

P53 detection in methylated and non methylated samples?

Hello everyone. I am about to search for the expression of genes including p53 in methylated and non methylated HPV samples. Should I extract DNA from the methylated samples and use SYBR green...

04 February 2021 2,749 3 View

Why has my protein transfer using fresh transfer buffer is worse when compared to protein transfer using old buffer?

Hello, I have performed two westerns in parallel, one using fresh buffer (made with old 10X tris-glycine) and the SDS gel was made 4 days prior to western; and the other western was performed...

03 February 2021 9,311 5 View

What are the factors on which exchange current density of an electrode depends, and how can they be predicted?

While surface roughness is an obvious factor, this is not what is exactly asked. Rather, periodic variation of exchange current density (of an electrode) with solution chemistry (of electrolyte)...

30 January 2021 4,886 5 View

Can someone explain why a methyl in phentolamine mesylate presents two correlations for 13C-HSQC, around the region it should appear?

Instead of appearing one single correlation of the signal of the carbon at 20.9 ppm (#11 in the attached figure), aligned to hydrogen at 2.29 ppm, it appeared two correlations (2,32 and 2,26 ppm)....

16 January 2021 4,774 2 View

Please how can I justify my regression results?

I conducted a study to investigate stock market reaction to equity issues announcement and i ended up with 64 announcements and i then used the announcement day returns as my DV and investigated...

14 January 2021 1,127 3 View

Do I need to make a special plasmid for bisulfite methylation test?

I have an inducible expression of the enzyme in a newly derived bacterial strain, and methylation may be affected. I want to test methylation efficiency with a bisulfite kit. The kit is the EZ DNA...

06 January 2021 7,218 2 View