In terms of camera based fluorescence microscopy, what does time interval mean?

I am getting slightly confused here... When the term 'time interval or delta t' is used, does it explicitly imply time between successive frames or can it also refer to the time taken to capture...

19 October 2020 3,105 5 View

Does fluorescence based imaging improve spatial resolution?

I understand specific techniques based on fluorescence and other methods can enhance the spatial resolution beyond the diffraction limit of lambda/2NA (xy-plane) in what we call as the...

03 September 2020 8,786 3 View

Is the CMOS compatibility is needed for solar cell manufacturing ??

texturing of silicon preferred mostly TMAH because of its CMOS compatibity whereever being low cost KOH and NAOH is not preferred because of its heavy mobile ion contamination. is in what sense...

20 December 2018 6,057 6 View

How the cracks can be incorporated into the model in any vibration related problems?

If we know crack parameters , and we have to model it using software (MATLAB or ANSYS) for analytical test results, how we can incorporate the crack into the system and justify the same in...

29 October 2018 2,942 3 View

What is the difference between the various homologs of a single coenzyme?

I was looking for CoQ10 ELISA kits and I came across some labelled as 'CoQ10 binding protein homolog A, mitochondrial' or CoQ10... homolog B..' what is the difference between these two in terms...

15 April 2018 268 4 View

Has anyone used Support vector regression and generated executable .exe for other matlab scripts to use?

I have an image database and opinion scores about images- now i need to run SVR, generate an .exe which will be used by other matlab scripts. Can you help out with some suggestions..

23 February 2018 3,896 1 View

How to obtain a curvelet transform matrix?

I want to obtain a matrix C in matlab which is the n-by-n DCT (discrete curvelet transform) matrix such that for a given set of signals X and given set of coefficients A (I supposedly think which...

02 October 2017 3,609 3 View

How to dispose off the plants used in phytoremediation processes?

copper contaminated soil

11 January 2017 7,627 12 View

Can anyone recommend a good textbook on smart materials for biomedical applications?

18 December 2016 8,651 3 View

Fluorescence assays: limit of detection

what are the current achievable standards in terms of lower detection limit in fluorescence based assays?

01 January 1970 8,109 8 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View