Numerical simulations of solid desiccant dehumidifier in solid desiccant cooling system.
Thank you sir for valuable answer.
See the following:
https://www.comsol.se/paper/download/182173/diglio_paper.pdf
Thanks for the answers
Mathematical model of desiccant dehumidifier.
07 August 2019 7,087 8 View
Simulation of desiccant based air conditioners.
01 February 2019 1,989 4 View
Simulation of desiccant wheel.
01 February 2019 3,169 4 View
Artificial neural network.
31 December 2018 958 8 View
ANN.
31 December 2018 5,904 0 View
31 December 2018 1,236 0 View
Optimization of desiccant wheel.
31 December 2018 5,001 8 View
31 December 2018 2,515 0 View
Simulation of air conditioning
31 December 2018 2,779 1 View
31 December 2018 5,872 0 View
When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.
16 June 2021 0 0 View
Hi, im trying to make a projection in a 3d comsol model. I have a non uniforme chanel and my intention is to get the average tempreture in the y-z cross section and se the average tempreture...
02 March 2021 4,624 4 View
Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...
02 March 2021 2,431 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...
02 March 2021 9,833 3 View
Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...
01 March 2021 9,537 2 View
I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...
01 March 2021 6,661 3 View