Your composition should also consist of polypyrrole as a binder. Pyrrole is a monomer. Apparently, you mean a 1: 1 mixture before the synthesis of polypyrrole. To compose a composition, find the density of substances and calculate.
suppose you have 2 different masses M1 and M2 and you mix them.
Then the wt% of the constituents of your sample are:
wt%1= 100*M1/(M1+M2) and wt%2 = 100*M2/(M1+M2).
For the case of three constituents of your composite please take similar equations but replace the denominator by (M1+M2+M3) i.e. the total mass of your sample.
Yuri Mirgorod thank u sir., but you mean the density of pyrrole to find the volume or mass or you mean sir the density of nanocomposite of all materials in composition
You must decide what ratio you want: the ratio of the reaction mixture CuFe2O4 / pyrrole or the ratio of CuFe2O4 / polypyrrole in the composite. The proportions are different molar, volumetric, weight. Therefore, the calculation is also different.
Yuri has already explained above and asks you whether you require mass, volume or molar compositions/ratios. The ball is in your court... ‘I want the ratio CuFe2O4/Ppyr‘ is not an answer.