How cane capture of Cl, K , Na, in the process of biomass gasification, I want to let these elements enter the solid slag phase but not enter the gas?

I want to fixation Cl, K, Na in gasification slag, which type of catalyst can be used?

13 January 2021 2,145 2 View

What should I interpret from the following TGA curves?

I have coated my adsorbent with SiO2 layer using Stober's method. I have performed the TGA for both the samples and as you can see from the images attached, they are completely different. From...

31 October 2020 9,390 9 View

How to calculate exhaust gas temperature as a function of engine speed in IC engines?

Looking forward to any research work/ mathematical equations.

13 September 2020 213 6 View

How to Calculate (convert) distance in mm to wavelength units?

I need to calculate the slot distance of circular and rectangular cutout in terms of wavelength in a waveguide antenna (from mm to wavelength). The reference papers have pre calculated values and...

22 August 2020 5,857 4 View

How one can theoretically calculate the exhaust gas temperature for an IC engine?

I need to calculate exhaust gas temperature at the engine exhaust valve outlet theoretically since I do not have teh luxury to calculate it using EGT thermocouple sensor. Any research...

21 August 2020 8,267 5 View

What is the temperature drop across the inlet and outlet of the catalytic converter in IC engine automobiles??

I am working on calculating the exhaust temperature in the upstream and downstream section of an IC engine catalytic converter. Please share any methodology or research article to corroborate your...

12 August 2020 323 3 View

What is the best way to analyse the impact of certain symtoms on quality of life between different studies not groups?

I am trying to analyse the impact of 9 symptoms on the quality of life between different ethnicities. I have around 9 studies representing 3 ethnic groups, each study has been done in a different...

07 August 2020 8,051 2 View

fatigue failure S-N curve ?

Hello dear, I would like to do a fatigue experiment on the Ansys program for a particular human bone. I need S-N curve where can I find it away from practical experiences

31 July 2020 2,340 5 View

What is the influence of engine load on the exhaust temperature of an IC engine?

While performing the calculations for exhaust heat content at IC engine outlet, I used engine speed as the main parameter to estimate exhaust temperature. Do I need to incorporate engine load as...

30 July 2020 9,282 14 View

During COVID19, many calls for adopting e-learning, what are the available indicators of the positive impact of this learning at school levels?

During COVID19, many calls for adopting e-learning, what are the available indicators of the positive impact of this learning at school levels?

10 June 2020 3,759 21 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

What is your perception on using visual analysis or quantitative approaches to evaluate data from single-case research designs (n of 1 trials)?

Results of single-case research designs (i.e., n-of-1 trials) are often evaluated by visually inspecting the time-series graph and computing quantitative indices. A question our research team is...

03 March 2021 687 1 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View