Anyone know a good, reliable source of routine lab protocols or techniques?

Veronica Laura Martinez @Veronica_Martinez16

06 June 2016 0 4K Report

I have to do some common assays in the lab, such as Gram dye, spore dye, COD, etc. Can someone recommend a source of these common lab protocols or techniques? I kept some from my time in university, when I learned several of the techniques, but I always need new ones.

Badges
Science topic

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Is there anyone who experienced with cytotoxic effect of Hoescht 33342 dye?

Is Hoechst toxic to cells? In general, it is known as non-toxic. I am working with dsRED MDA-MB-231 cell line. I applied it for my PDMS-based microfluidic platform, for this reason, I incubated...

26 February 2021 9,119 3 View

In methylene blue test Why is UV absorbance reading very low as soon adsorbent is added and then increasing before reaching equilibrium?

Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...

19 February 2021 472 5 View

How can I add a new WSN routing protocol in NS2 or NS3?

I'm trying to find in literature a way to help me adding a modified Yen's algorithm in ns2 or its variance ns3 or another simulator. Have you some tips which can be helpful, I'm opening in the...

19 February 2021 7,981 3 View

Has anyone performed a colorimetric RT-LAMP assay using Lucigens LavaLAMP kit?

Hi there, my lab recently opted to use LavaLAMP from Lucigen instead of the Warmstart kit from NEB. However, Lucigen has yet to create a colormetric kit for RT-LAMP, and adding phenol-Red (pH...

17 February 2021 5,399 1 View

How to improve the buffer capacity of sea water?

Hello everyone I would like to improve the buffer capacity of seawater (pH ~8) in order to dissolve as much CO2 as possible without dropping the pH below 7.5 (a range between 7 - 7.5 is...

17 February 2021 2,797 2 View

Can one use just 250 micron sieve & still get a good number of mycorrhizal spores from the soil?

In a situation where one cannot get the appropriate & separate levels of sieve for mycorrhizal survey work, can just one level of sieve give good results & spore counts?

13 February 2021 3,760 2 View

Why stop the reaction in ice for the fluorescent probe FDA (fluorescein diacetate)?

Hi, In literature I noticed that who stains haemocytes with FDA for 30 min then stop the reaction in ice while this does not apply for 15 min incubation time (or maybe authors did not write this...

08 February 2021 3,366 3 View