Do anyone know how to animate graph in matlab?

IN THIS ATTACHED TUTORIAL HE HAD ANIMATED THE FORCE VS TIME GRAPH USING MATLAB... PLEASE SHARE THE PROCEDURE HOW TO DO IT? AM NOT AWARE OF USING MATLAB.

02 March 2017 357 4 View

How to convert crosshead speed into strain rate while doing tensiletest?

could anyone share how to convert crosshead speed (say 10mm per minute) to strain rate (per second) while performing tensile test.

02 March 2017 8,981 8 View

How to Transfer model from hyperform to abaqus?

hi i ike to knw whether the output of manufacturing simulations can be taken as model or part file to abaqus for further impact test. plz do share your valuable suggestions

01 February 2017 7,280 0 View

Is Aluminium sensitive to strain rate?

hi i would like to know whether cast aluminium is sensitive to strain rate when tested at impact test of velocity 8 m/s. some of them r telling that aluminium is not strain rate sensitive however...

01 February 2017 8,386 8 View

Does anyone know where the facility of drop mass impact test is available in india?

am in need of performing low velocity impact test of samples using drop mass setup with velocity upto 15 m/s and mass of 50-100kg.plz suggest whether thz machine is available in india.

08 September 2015 2,394 2 View

Is it feasible to produce an aluminium-based hybrid composite as a reinforcement of two different nano ceramic materials?

09 October 2014 5,207 4 View

Can aluminium based hybrid composites can be made with reinforcement of silicon nitride and graphite?

Silicon nitride and graphite are added as a reinforcement material to aluminium alloy ,I wonder whether this combination will work out.

09 October 2014 5,719 5 View

Anisotropic properties in hyperform?

How to include anisotropic material properties to a blank (sheet material) in hyperform? if it so what are the material parameters required? plz do share ur valuable comments

01 January 1970 5,511 2 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

How to construct different filler shape in MD simulations?

Is there any way to construct different initial filler shapes like triangle, square, rectangle, pillar, and tube in any simulation software.

20 February 2021 1,750 1 View

How to calculate stress at the cross section of spherical particles within a matrix?

Hi all, I am currently working on some background calculations before I start a new project related to metal matrix particulate composites. I am trying to find a way to calculate the stress at...

19 February 2021 8,503 3 View

Drop weight impact testing machine for composites?

Dear all, I hope everyone is safe and healthy I do have a question please. Where can I find a drop-weight impact testing machine to test fiber reinforced polymer composite plates (CFRP and GFRP)...

17 February 2021 3,820 3 View

What is the harmless way of cutting epoxy filled nanocomposite ?

I want to cut epoxy filled nanocomposite for FE-SEM analysis. What is the best way to cut it without resulting in any cracks or change in position or alignment of the particle reinforcement ? Also...

28 January 2021 7,084 5 View

How could I do a simulation for the energy consumption of a CNC machine?

I'm working on my dissertation and it is about how to save energy when a CNC machine goes to idle mode. (A concept model of the idle machine energy saving in industrial manufacturing...

26 January 2021 9,620 5 View

Is it possible basic matrix material having higher material removal it's corresponding composites materials In wire EDM process ?

Actually, I am working with Al-B4C- Al2O3 hybrid composites. I have performed the operation by utilizing the wire EDM process to my developed composites. I found alloy 6061 as a base matrix having...

21 January 2021 7,381 3 View

How to know homogeneity of two thermoplastic polymer composite?

I have melt mixed to thermoplastic polymers. But I want to know the homogeneity of the composite. What are the methods to determine whether the composite is homogeneous or not? Please help.

20 January 2021 9,085 5 View