Hello, does anybody have experience on a soil infiltration model except SCS curve number that can be used to estimate daily infiltration after rainfall occur in an agriculture fields, less than 5 ha.
check this links the articles maybe help you
https://hydrology.agu.org/wp-content/uploads/sites/19/2016/06/Horton1940.pdf
Article Spatial Variability of Field-Measured Infiltration Rate1
http://soilphysics.okstate.edu/teaching/soil-6583/references-folder/rawls%20et%20al%201983.pdf
Infiltration is the process by which water on the ground surface enters the soil. Infiltration rate in soil science is a measure of the rate at which soil is able to absorb rainfall or irrigation. It is most often measured in millimetres per hour or inches per hour. The rate decreases as the soil becomes saturated. Infiltration is the downward entry of water into the soil. The velocity at which water enters the soil is infiltration rate. Infiltration rate is typically expressed in inches per hour. Water from rainfall or irrigation must first enter the soil for it to be of value. Infiltration is an indicator of the soil’s ability to allow water movement into and through the soil profile. Soil temporarily stores water, making it available for root uptake, plant growth and habitat for soil organisms.
Conservation practices resulting in infiltration rates favorable to soil function include:
Conservation Crop Rotation
Cover Crop
Prescribed Grazing
Residue and Tillage Management
Waste Utilization
https://www.epa.gov/water-research/infiltration-models
https://www.sciencedirect.com/science/article/pii/S1537511006002790
http://www.sciencedirect.com/science/article/pii/S1110492916300728
http://www.tandfonline.com/doi/pdf/10.1623/hysj.51.1.3
https://link.springer.com/article/10.1007/s40808-017-0357-1
Please check these links
Article Relationship between soil erodibility and modeled infiltrati...
Article Modeling soil solute release into runoff with infiltration
- Badges
- Science topic
- Similar topics
- Engineering
- Modeling