Abaqus modeling - FAQS.TIPS

06 June 2013 1 8K Report

Is there any way to model a viscoelastic material in Abaqus using the results from tensile and relaxation tests of dog-bone shaped samples of adhesives?

Yoann Joliff

viscoelastic behaviour can be introduced from an experimental measurement "creep test data" or "relaxation test data". You can do it in the property module under viscoelastic behaviour. From a tensile test data I am not sure than you can used it directly in the software.

Badges
Science topic

More Marcin Kozłowski's questions See All

How to model a material in Abaqus with 2 types of behavior: high stiffness in compression and low stiffness in tension?

I am modeling a dynamic problem in Abaqus. The material should have two types of properties: different Young's moduli in tension and compression. Any simple way to achieve it? Thanks!

01 February 2020 7,888 2 View

Can anyone has access to ASTM D638-14?

Hi There, I am working with tensile properties of adhesives. Are there many differences between ASTM D638-14 and the version of the code from 2004 I currently use? I would be grateful for any...

09 October 2017 8,600 0 View

Any eperience with elastic viscoplastic material model in Abaqus?

I am working on polymers with elastic viscoplastic behaviour. Can anyone share experience with practical implementation of the material model in Abaqus?

08 September 2017 2,979 4 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View