Substances produced from the reaction between acids and bases; compounds consisting of a metal (positive) and nonmetal (negative) radical. (Grant... | Contact experts in Salts to get answers
4,915 views 970 posts
Questions related to Salts
Can I transfer methane from cylinder to gas sampler using Silicone pipe or should I use any other pipe?
02 September 2021 9,790 1 View
How often should I clean it, is it every 6-months/yearly? Is this protocol right for cleaning? 1st Time we got this water distiller I use salt lemon 0.5 Kilio & turn on the device for 3 hours...
31 August 2021 1,426 4 View
I'm recovering citric acid by addition of calcium carbonate from a process as it's calcium salt. Would like to method to determine purity of calcium citrate product. The method I found uses...
23 August 2021 8,909 3 View
I am evaluating the particle size distribution of a plant protein-polyphenol complex as a function of ionic strength (50-500 mM) and the results are a little bit odd. In general, the particle size...
23 August 2021 4,914 5 View
Since gentamicin absorbs ultraviolet and visible light poorly and the molecule lacks fluorophores, no direct spectrophotometric or fluorometric method can be applied. I did the fluorometric method...
23 August 2021 3,183 1 View
I want to evaluate the robustness of the clustering algorithm to noise ... How can I add noise to the data... Is there a well known method (such as salt and pepper in the image data)?
22 August 2021 6,756 5 View
One of my relative admitted in hospital. he had angioplasty. Interventional Cardiologist recommended him to take medicine Ramipril BP (Controls Blood pressure) and Rosuvastatin (Controls...
19 August 2021 4,537 17 View
I want to determine bull sperm DNA integrity using ''Acridine orange hemi (zinc chloride) salt, Fluorescent cationic DNA and RNA dye '' of abcam's. Does anyone know an ideal procedure and...
14 August 2021 4,701 2 View
I'm looking for a precursor that to be low-cost and in access. please guide me to find it or introduce me to a related article
14 August 2021 1,473 1 View
Hello, does anyone know literature related to the solubility product for calcium malate, malonate, maleate, gallate, phthalate and succinate? Thanks
14 August 2021 2,433 3 View
Any recommendations?
12 August 2021 6,566 3 View
Usually for the complexation of porphyrins with Fe, Mn or Co, salts like Fe(II)-chloride, Mn(II)-acetate tetrahydrate, or Co(II)-acetate tetrahydrate can be used. But for the same with Ru or Ir,...
09 August 2021 4,966 22 View
Hi all, I have a protein which, once purified (e.g., in its elution buffer), is very easy to aggregate, as manifested by the formation of flocculent mass floating in the solution, and a reduction...
04 August 2021 9,076 8 View
Distinguished researchers, hello. I have a question for you. Recently, I have been doing research on bacterial exocrine protein, but the protein concentration obtained after washing the...
27 July 2021 4,043 1 View
The media contains NaCl, KCl, MgCl2,CaCl2 and NaHCO3 dissolved in Di water. When I autoclave each solution separately it does not precipitate.
26 July 2021 3,959 4 View
Hello, I am new to Crystallization and I am looking for a trick to identify protein crystals or salts in my samples. Does anyone know a dye that I can use for this kind of screening? This has to...
21 July 2021 2,329 4 View
I need to do a low temperature (200°C) molten salt coactivated magnesiothermic reduction (MgR) of SiO2 but I don't have a proper crucible. In literature SS sealed containers are often used for MgR...
14 July 2021 1,705 7 View
Hi all, I am analyzing the concentration of PFOA (Perfluorooctanoic acid) using LC/MS/MS (negative ionization mode). In my method, I'm also using 13C8-PFOA as my internal standard (IS) to take...
13 July 2021 5,195 2 View
I built an electrolytic cell. There are an anode plate and a cathode plate. Each plate of 7x12 cm dimension (the width is negligible), and connected to a DC power supply. Moreover, both plates are...
12 July 2021 7,953 0 View
What is the concentration of salts and other materials used in the column binding phase and the washing and release phase؟
08 July 2021 1,291 5 View
I am running Builder CMG simulation for a reservoir model and I got this error and abnormal simulation result. =================== FATAL ERROR (from subroutine: ININI2) ====================...
08 July 2021 164 0 View
hello every one i have aqueous two phase system consist of PEG6000 + K2HPO4 both in liquid phase i used the salt as separating agent. how i recover the solvent (PEG6000) any methods or...
07 July 2021 5,830 2 View
Requirement of hydrogen as fuel directs us to utilise sea water but the computational techniques for such analysis are rare, how do we simulate the sea water catalysis using ab inito methods
06 July 2021 5,293 1 View
I have synthesised a salt by the replacement of BOC group to TFA. The problem is that the component absorbs moisture in the air instead of turning into solid form. Is there any possible way to dry...
05 July 2021 5,245 2 View