Contact experts in MATLAB Simulation to get answers
4,308 views 495 posts
Questions related to MATLAB Simulation
As we all know, by adding cyclic prefix, OFDM signals can be able to tackle with both ISI and ICI. But how does the reflected signal affect the demodulation (FFT/DFT) on the same sub-carrier? In...
10 October 2015 4,078 9 View
PV system and distribution system are easily modeled in MATLAB simulation but how can we integrate them and what are the useful control strategies to make system balance and how it affects local...
10 October 2015 2,579 5 View
I designed a IEEE 30 bus system in ETAP. Can a filter be designed in Matlab and linked up with ETAP? If it is possible, then how to select that matlab file into ETAP?
10 October 2015 4,276 3 View
We are doing Parallel Rotor Speed and Stator Resistance Estimation using MRAS Scheme for Space Vector Modulation based Direct Torque Control (DTC-SVM) of an Induction motor drive at low speed...
16 September 2015 3,947 3 View
Hello, I have used the 8 noded 3d solid element to analyze the structure displacements and stresses. My task is to built a FEM program using MATLAB which will give the structure displacements and...
09 September 2015 6,227 2 View
I have made a control algorithm which gives me reference direct voltage and reference quadrature voltage for my developed system.I wish to to calculate required value for modulation index "m" to...
09 September 2015 4,201 5 View
i want to model a QOSK transmitter and receiver in matlab. please help me
09 September 2015 2,761 0 View
Hello Madam !! Could you please help get some literature or MATLAB ,simulations on this topic 'Energy management of electric vehicle using Bidirectional Dc Dc Converter" .. esp wrt 1.recovery of...
07 July 2015 5,239 0 View
Mainly i am facing problem with series APF , i have done shunt APF.
05 May 2015 6,903 3 View
I just wonder if MATLAB can take the advantage of hyper-threading and multi-cores.
05 May 2015 7,976 1 View
While implementing RED algorithm in ns2 i have already used the line "set val(ifq) Queue/RED " for using RED and set the following parameters Queue/RED set thresh_ 5 Queue/RED set maxthresh_...
30 April 2015 9,311 0 View
Hi, I am doing a project in ns2 which uses chinese remainder theorem to divide the messages that are received from the other nodes (source nodes). how can i send the message from one node to...
11 April 2015 7,676 3 View
From the basic engineering itself this question has posed me lot of trouble. The main reason is that there is lot of explanation available and few contradict each other. For example, one...
04 April 2015 5,943 55 View
Traffic offloading from Macro cell to pico/femto/micro. I just need a starting MATLAB code for designing 2-tier heterogeneous network.
04 April 2015 2,597 3 View
How do I send beacon messages from several beacon nodes to one unknown (coordinates are not known) mobile node in NS2 in a WSN? Any code or information would be really appreciated.
17 March 2015 9,219 3 View
I want to simulate WSN which use compressive sensing in transmissions. Unfortunately I do not know , how I should implement compressive in this simulation?
12 March 2015 6,848 5 View
I have a case study that will compare two surfaces in 3-D, I used mat-lab software but I need something that has better outputThanks
05 March 2015 5,241 6 View
I'm looking for code source in C, C ++ or C # to evaluate a transfer function provided in "s" space and generate similar graphics like the "step" and "impulse" functions in Matlab.
03 March 2015 3,849 10 View
my doubt is that AC tachogenerator is producing triangular voltage wave, i am giving that voltage signal to ADC port of the Dspace, for the closed loop operation need to convert that signal into...
03 March 2015 5,822 4 View
I wrote a very nice Matlab code that solves Laplace's equation on a 3-D complicated geometry. The solver is implicit, so my systems of equations is reduced to a matrix equation. I use a...
03 March 2015 4,456 5 View
thank u all...
03 March 2015 5,091 2 View
I am working on a solar project.I have started simulation of grid connected pv system.First I have simulated individual modules PV, Boost Converter and multilevel inverter and their outputs are...
03 March 2015 1,838 5 View
I want start using the Graphical User Interface (GUI) of the MATLAB, since I think that it can be very useful in performing simulations. Can somebody give relevant links/references/video lessons....
03 March 2015 2,901 2 View
Does anyone have a sample matlab code for constructing a connected dominating set in randomly deployed wsn, based on flat communication and not clustering?
03 March 2015 4,503 0 View