Review and cite DEVICES protocol, troubleshooting and other methodology information | Contact experts in DEVICES to get answers
10,391 views 1,176 posts
Questions related to Devices
Hi all, How do you compare the tensile strength of a polymeric membranes tested at two different speed? I have a membrane tested at 20 mm/minute and the resultant strength is 3 MPa while a...
04 September 2022 6,671 0 View
For instance I need to know statistically in a area of 1mm * 1 mm how many 110 or 101 or 011 grains are present or grains closer to any one of these will be mapped under one these plane group. I...
03 August 2022 2,302 2 View
In order to simulate the effects of radiation damage on the dark current of a CMOS image sensor, I need to obtain the particle charge generation due to heavy-ions using a monte-carlo tool like...
29 July 2022 8,114 0 View
Hi, We perform in vitro retinal cell cultures in our lab. We have a bunch of packaged sterile equipment (syringes, pipette tips, filters, etc.) that are past their expiration dates by a couple of...
29 June 2022 612 1 View
Hello, I have a question regarding biogas production measurement. Is it possible to have reliable data of gas production if the system: 1) Continuously measures volume and pressure. 2) The...
23 June 2022 7,316 0 View
5G technology has a theoretical peak speed of 20 Gbps, while the peak speed of 4G is only 1 Gbps. 5G also promises lower latency, which can improve the performance of business applications as well...
20 June 2022 1,004 7 View
I fabricated Schottky diode using CNTs precipitated over P-type silicon with Ag electrodes. ThV-I curve revealed the the dark current is higher than the illumination current. I can't find an...
18 June 2022 2,771 0 View
I'm required to make a jig that measures the divergence angle of a collimated beam. The setup is straightforward as shown below. The single-mode fiber optic cable, collimator & NIR camera are...
15 June 2022 1,811 0 View
error: The program terminated due to an error: Initialization failed to converge electrostatic potential update.
13 June 2022 9,915 0 View
Do we have a tensorflow lite version of super-resolution models applicable to embedded devices and environments ?
22 May 2022 9,726 0 View
Hello Dear researchers In recent years self-balanced switched capacitor boost Multilevel inverters become a more trending research area. In which the capacitor is connected across the DC source...
04 May 2022 8,915 1 View
The thermal response to a step in heating power is shown in the first picture. Thermal equivalence networks, Foster Network, can be obtained from the thermal response curve. The impedance, a(s),...
04 May 2022 5,327 0 View
Hello, I have simulated the case study shown in the attached paper and I got the same values of lift and drag coefficiencts for the case of 30 degress tilt angle. Now I wanna calculate the...
30 April 2022 5,942 0 View
Hi there, I'm going to perform a behavioural experiment in a closed plexiglass chamber, linked to a ventilation system through a hole (let's think about it as a fume hood). In this experimental...
28 April 2022 6,211 1 View
In Side polishing or chemical etching technique micro-cracks occur which generates rough surface. As a result the sensor performance deteriorates significantly. Is it possible to implement laser...
19 April 2022 4,128 0 View
Hello, I would like to ask if there is any typical schematic for a Class D power amplifier that is designed on Keysight ADS software that I can adopt for a designed HEMT device? With the main...
12 April 2022 7,998 4 View
Dear ABINIT users, I want to use modified Becke-Johnson exchange in Abinit code with 8.10.3 Version, first of all I'm not sure it is possible and then I don't know how I can do that. I tried to...
12 April 2022 1,375 0 View
Dear Abinit users, I would like to calculate the complete band structure using the hybrid functional (HSE06), is this possible in v8.10.3? Can anyone provide a help on the general procedure to...
20 March 2022 4,719 1 View
Dear colleagues, Pleas help us on lab equipment question. We plan to purchase ICP-OES (Thermo fisher Scientific) and proper package of element references will be needed. Taking into account,...
21 February 2022 7,328 3 View
I am looking for a protocol that allow us to measure GSR during the experience of touch. As we know GSR is really sensitive to movement so I want to know how could we free from the movement...
15 February 2022 2,061 1 View
I have a Jasco FT/IR 460 pus spectrometer connected to windows 98. even though i have installed the instrument driver (from spectra manager CD ). i could not make data acquisition terminated...
10 February 2022 8,426 0 View
Hello, can anyone help me? When I open cif file with file>open , the software (crystal explorer 21.5) shows error processing CIF: Error in TEXTFILE:open_new_file_for_write ... error opening new...
07 February 2022 984 0 View
Doping is one of the way to reduce the bandgap of ferroelectrics/any materials. By doing so we create many defects in the system. these defects have a role on electrical conductivity (AC/DC). Is...
01 February 2022 5,836 3 View
I am looking for any publications, or companies who work in biological receptors generation, isolation and their implantation on desired devices Kindly provide inputs
28 January 2022 7,389 0 View