Review and cite CONTROL SYSTEMS protocol, troubleshooting and other methodology information | Contact experts in CONTROL SYSTEMS to get answers
5,353 views 384 posts
Questions related to Control Systems
We are interested in developing a electrospinning system and need: Flow rate: 1-5 mL/h
05 December 2019 384 1 View
the relationship between the fractal dimension and the optimization control systems is that the fractal dimension provides the substrate necessary to create the optimal trajectory for a tumor...
14 November 2019 1,032 2 View
I have designed a control system for a based on the paddle displacement and I have been asked whether the controller would cause overshoot of force. I'm not sure whether it is possible to get the...
12 October 2019 4,964 3 View
Ailerons are often seen to have push-pull rod and cable-pulley mechanism both but rudder are mostly operated by cable. Even though Push-pull rod requires less maintenance, more reliable, rudder...
25 September 2019 6,246 2 View
The circuit is shown in the attached picture, It is difficult to find the transfer function right know .In the figure Ictrl is the dc current coming after thyristors switching and Irms is the rms...
06 September 2019 10,185 4 View
I'm trying to design a height control system using fuzzy logic controller. My subsystem is working perfectly fine, however I'm getting output =0 after adding my FLC. I've attached my Simulink...
28 August 2019 361 3 View
Assume we have a control system in state space as: xdot1=u1, xdot2=u2, where x is state and u is control. I am interested to know the possibility of complex valued control signal to control such...
28 August 2019 7,243 3 View
I have a speed profile of a vehicle which consist of 100 points and I want to add this speed profile as a measured disturbance in my nonlinear mpc system. Is there any way to do it in MatLab by...
23 August 2019 5,828 3 View
About the recent aspects of deep learning in control systems
07 July 2019 9,680 8 View
I'm trying to control temperature with PID(Kp,Ki, Kd). During the rise time the system use one PID and when target is reached the system switch to another PID with other parameter in order to...
04 July 2019 5,920 6 View
I am working on a project, where I have a PID controlled Hotplate. I want to model the system in Simulink and for that I need to find the PID values which are unavailable due to some reasons. Is...
24 June 2019 310 4 View
In "Simultaneous Stabilization and Tracking of Nonholonomic Mobile Robots: A Lyapunov-Based Approach", the authors stated that the nonholonomy of mobile robots allows control of the system with...
28 May 2019 7,893 4 View
I am trying to design a control system for an unstable MIMO system (4 inputs, 4 outputs, 8 states). I use the full state feedback to place the poles such that the closed loop is stable. But the...
21 May 2019 8,596 6 View
The 3 faulty events are: 1. CCS is engaged even if disengage button is pressed. 2. CCS is engaged even if brake paddle is pressed. 3. Unable to start CCS. A fault tree for each event.
25 April 2019 9,512 1 View
I'm working on Control Systems of advanced UPFC. For continuing research I need an help me about this
12 April 2019 4,461 2 View
Dear Researchers, I have a simple (but rather confusing for me) question to ask. What are the rules to decide the output reference of a PI controller. For example if i am regulating frequency...
05 April 2019 2,791 12 View
I am relatively new to this topic. I understand the basics of optimization of control systems using a cost function and constraints and solve it as a minimization or maximization problem. I also...
29 March 2019 6,550 2 View
I am interested to know, why is control set in control systems theory, usually assumed convex, more specifically, a convex cone, a convex hull or a convex set? Please let me know if you've gotten...
25 March 2019 7,427 4 View
I'm designing an extended Kalman filter observer in a control system. In the control system, there is an MPC controller. Do states, inputs, and outputs used in observer have to be the same as...
18 March 2019 4,260 3 View
Suggest me some recent trending topics in control systems area for research work.
13 March 2019 5,339 3 View
By this question i want to know that how control system "classical or modern" can be used in the analysis of heart variability in any method of analysis linear or nonlinear, mathematical model...
04 March 2019 9,572 2 View
See videos demonstration of new controller work and comparing results with conventional PID controller (solved problems with stability, adaptability , robustness and disturbance rejection)....
04 March 2019 5,380 8 View
The coordinate measuring machine (CMM) is a mechanical system that moves a measuring probe to determine the coordinates of points on the surface of a work piece. The CMM comprises: the machine...
02 March 2019 9,147 2 View
I am researching on controlling systems with time varying parametric changes. After studying few exemplar/textbook systems, I would want to apply it to a practical scenario. Thus, looking for a...
19 February 2019 4,485 4 View