Contact experts in Computational Engineering to get answers
1,498 views 83 posts
Questions related to Computational Engineering
I read in a book. I feel that firstly chip enable is given and then r/w signal.
06 June 2015 4,542 1 View
03 June 2015 8,144 1 View
I need a hspice deck to find leakage and dynamic power for cntfet based 4-input ternary xor gate ?
15 May 2015 5,739 1 View
Please I need a help in emergency, I would like to ask if anyone has a benchmark, or workload data on Grid/Cloud or Peer to peer systems, or any client/server applications, to provide me with...
12 May 2015 414 4 View
I was trying to model the coupling of two single turn coils in Comsol 5.0 in 3D. this is same as the model in 2D presented in the model library of comsol which is named mutual-inductance. if you...
12 May 2015 2,020 3 View
05 May 2015 9,280 4 View
05 May 2015 1,784 1 View
In Matlab something like this should work: x= 1:10;h = plot( 2*x+3,x );rotate( h, [0 0 1], 90) But, if I try the same code in GNU/Octave, it answers, that the function "rotate" was not implemented...
05 May 2015 1,641 3 View
05 May 2015 3,845 5 View
Hello everybody. I want to define contact conditions between a seal rubber gasket and the side part of a car in Abaqus. The initial geometry I have received contains two instances (seal rubber and...
05 May 2015 3,087 2 View
As attached files, I don't know how to mixture fluid between rotating domain and stationary domain. Any recommendation.
05 May 2015 2,122 4 View
Dear all I want to modeling the direct shear test using FLAC2D. I therefore need to write a fIsh function to obtain horizontal displacement and shear stress?
24 April 2015 5,378 4 View
I am modeling infilled frame in TNO DIANA. For infill frame joint, i define interface using free edge, but i am confused that it will work or not. Because, when i apply load, load is transferred...
21 April 2015 9,332 4 View
I am doing research on laser cutting. I am trying to remove/ deactivate the element after exceeding the melting temperature. I tried by using following code. /SOLU ! Enter SOLUTION... ! Typical...
16 April 2015 1,261 3 View
04 April 2015 8,607 5 View
According to the User subroutine Abaqus manual, "If thermal expansion is included in the same material definition, the strains passed into UMAT are the mechanical strains only (that is, the...
04 April 2015 7,260 7 View
How the loading calculation for the wave spring need to be done ? what are all the input parameters ? I am working on one patent where i need to calculate the loading on the wave spring.
04 April 2015 5,835 2 View
I performed a simply supported beam in the lab and now I am trying to model it by finite element analysis software (MIDAS FEA). In the modelling by finite element software, Do I need to add the...
04 April 2015 8,358 7 View
04 April 2015 4,459 3 View
These are the properties i have assigned: MP,MU,4,0.75MAT,4 TB,CZM,4,,,CBDETBDATA,1,0.25,0.018,0.35,0.125,0.0001,1 R,3 REAL,3ET,5,174ET,6,170 R,3,,,-82,,,...
04 April 2015 541 2 View
Hi, I am using ANSYS APDL for modelling a bridge under flood hazard. I am stuck at a point where I am unable to feed the flood load in terms of the flood velocity without actually calculating the...
04 April 2015 6,639 2 View
04 April 2015 2,781 5 View
What kind of constraint should be apply to the edges?
03 March 2015 2,737 3 View
I am considering study of rotating disc with shaft (3000RPM) in which, on surface circular strip of certain depth the internal heat is generated, for around 900 seconds is applied. Now, in order...
03 March 2015 2,441 2 View