Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the... | Contact experts in Ceramics to get answers
4,520 views 765 posts
Questions related to Ceramics
in a pure batio3 transition temperature is increase on doping of transition element. plz help me to understand .
02 February 2018 5,530 2 View
silicon nitride grids or ceramic grids which one is the good choice. If any other product is avilable please let me know.
02 February 2018 5,582 3 View
Apart from adding ceramic grog to clay to reduce shrinkage, can grog be used for anything else?
02 February 2018 5,155 9 View
We have developed some new perovskites based ceramics for thermoelectric measurements. We do not have facilities for measuring their thermoelectric figure of merit. The question is intended to...
21 January 2018 425 2 View
This is for use in an Microwave Oven. Hence has to withstand approximately 2000o Celsius. Vacuum pump will be connected to the lid of the crucible. Therefore a sealant is also required which would...
18 January 2018 3,818 1 View
I've done Cellulose Nanocrystals and I need to measure their piezoelectric response but I don't know how do it. Can you help me please?
15 January 2018 4,655 6 View
01 January 2018 3,088 2 View
01 January 2018 2,017 1 View
Dear Experts, I am going to simulate impact behavior TiO2 nanoparticles with Molecular Dynamics. Please let me know which package is more proper based on your experience. With the best...
12 December 2017 3,832 3 View
The machine (setup) is based on archimedes principle. The values for metals are similar from calculaion and from machine.
12 December 2017 9,684 9 View
I am looking for the experimental data in literature who could show the influence of porosity on coefficient of thermal expansion (CTE) and creep strain rate for ceramics such as YSZ. So far, no...
18 November 2017 8,053 6 View
I have 25mm thickness ceramic based micron size particle material. Apart from I want to do correct reconstruction of the material from X-Ray Computerized Tomography Microscope(XT-400). which one...
15 November 2017 1,107 1 View
11 November 2017 2,804 6 View
11 November 2017 8,640 1 View
Magnetic induced polarization has been reported about HoMn2O5, are there some data about single crystal or polycrystalline ceramic of HoMn2O5?
11 November 2017 8,722 2 View
09 November 2017 6,218 2 View
I put 1 gram of Li foil on ceramic pot and put they in hot plate in glove box, the temperature was maintained at 350-C for more than 2 hours but it is not work. Is there any pre-treatment for this...
12 October 2017 1,667 6 View
i'm working on PZT doped ceramic, i prepared 8 sample (20 g each) and now i'm preparing to do calcination so i need a detaille about this opération, does pelletizing important for this opération ?...
10 October 2017 7,298 9 View
Has anyone faced the problem of intensive arcing during plasma etching of ceramic substrate in PVD technology? What is a proper way to prepare ceramic/cermet surface before coating to reduce arcing?
10 October 2017 890 8 View
Hi there. I want to get some parameters such as E (Young's Modulus), G and Poisson Ratio of Ceramics Tablets (92% Alumina). I want to know how can i obtain them with which accessible methods?
10 October 2017 5,256 2 View
10 October 2017 8,807 6 View
Which type of hardness measurement, macrohardness or microhardness is proffered for knowing the hardness of polymer nanocomposite with ceramic/metal nanoparticles reinforcement?
10 October 2017 9,146 3 View
i need a beaker which i can use for my experimental process. i also need a type of rubber or ceramic which i can use to seal it.
04 October 2017 2,290 3 View
03 October 2017 7,133 3 View