9 Questions 11 Answers 0 Followers
Questions related from Su Ildiz
Dear All I would like to coat silicon tubings (Tygon) with 1% Pluronic F127 to prevent cell attachment inside the tubing. Can I use the coated tubings 1 day after I coated or should I use...
22 November 2021 4,609 0 View
Dear All I would like to bond my PDMS chip to a glass but the size of my chip will be greater than a usual glass slide. Therefore, I need to bond it to a larger glass. Is that possible? Or can it...
12 October 2021 5,439 3 View
Dear All I would like to use a peristaltic pump that applies minimum shear stress on the roller part. It is also important to have a multi-channel pump since many parallel experiments at the same...
12 September 2021 9,246 3 View
Dear All I would like to use a peristaltic pump that exerts minimum occlusion in the rotating part of rollers, since cell flow will be inside the tubings. Therefore, is there a commercial...
07 September 2021 9,164 0 View
Dear All Can I place a peristaltic pump system with tubings and microfluidics chip completely into the incubator for 1-2 days long experiment? If yes, is there a specific brand for that...
06 September 2021 971 11 View
Dear All I am trying to plot shear stress values in 3D microchannels and I am using the formula spf.sr*spf.mu however I am getting different values from online microfluidic channel WSS...
20 July 2021 4,255 7 View
Dear All I am trying to simulate cells in a 2D laminar flow using two phase level-set method in COMSOL. I use p1 = 1000 kg/mˆ3 and dynamic viscosity u1 = 0.001 Pa.s for liquid and p2 = 1500...
17 July 2021 1,268 3 View
16 July 2021 7,216 1 View
Dear All I will be using a peristaltic pump with 4 or more tubings with flow rate range nearly 0.2 ml/min to 40 ml/min. Which peristaltic pump brand do you recommend? Thank you very much. Best...
16 July 2021 6,745 2 View
