Prabin Pathak

10 Questions 15 Answers 0 Followers

Questions related from Prabin Pathak

How can i set number of cycles in ANSYS APDL ?

I am using a sine load in ANSYS APDL. I have run it for a cycle. I want to run it for about 2 million cycles. How can i set number of cycles in ANSYS APDL ?

08 August 2015 3,443 1 View

How can I use cyclic load in ansys apdl?

I am modelling a FRP strengthening Rc beams under cyclic load. I am using sine load. When i decrease the time step size(0.1,0.01,0.001), the deflection increases every time. But with very small...

08 August 2015 7,288 3 View

How can i input data for subroutine USERMAT in ANSYS ?

I am using USERMAT.F subroutine for both two different materials steel and FRP. I dont know how to input data using TB, USER command for two different types of materials. I am using USERMAT3D...

07 July 2015 3,633 1 View

How can i compile UPF in ANSYS ?

I have compiled Usermat via Relink ANSYS in ANS_ADMIN. it produced ANSYS.exe but when i tried to activate it through USRCAL, i could not find USERMAT there. And again, i tried to compile through...

05 May 2015 5,001 5 View

How to calculate effective bond area ?

I am modelling FRP strengthening RC beam in ANSYS. Can you suggest me how can i calculate the effective bonded area between FRP and RC beam ? I am using FRP at bottom part (soffit) of the RC beam...

04 April 2015 6,316 4 View

How can one get axial strain in ANSYS ?

For the FRP strengthened RC beam, I want to calculate concrete strain and FRP strain separately. There are so many strain functions i.e. first principle, second principle etc. but How can i get...

03 March 2015 1,082 4 View

How to model bond slip using interface element Combin39 in ANSYS?

I am modelling FRP strengthened RC beam using Combin39 as interface element to model the FRP/concrete interface. I am using a bond slip model which will provide me bond stressa and slip relation....

03 March 2015 7,260 5 View

Why did solution in ansys not converging after first crack appear in RC beam ?

I am modelling RC beam with Solid 65 and link 180 for concrete and reinforcement respectively. I have used Hognestad model for stress-strain relation in compression. I got converged and accurate...

01 January 2015 5,840 2 View

Why is nodal y displacement very less in comparison to experimental result in rc beam ?

I am trying to model rc beam in ansys with solid 65 for concrete and link 180 for reinforcement. I am using symmetric boundary condition, so quarter of specimen is modelled. But, when I try to run...

12 December 2014 5,774 7 View

How can I merge coincident nodes in ANSYS?

I am modelling the rc beam with solid 65 for concrete and link 180 for reinforcement. I am using discrete method for reinforcement. While merging coincident nodes between concrete and...

12 December 2014 1,233 2 View