7 Questions 7 Answers 0 Followers
Questions related from Asif Raza
I assembled the LFP and NCM full coin cells with SiO anode. After assembly their OCV was arround ~50uA, After resting for 12 hrs it shows negative OCV. What could be the reasons?
30 August 2024 5,642 3 View
Is it possible to coat Si or SiO particles with Graphene Oxide dispersed in DI water by stir drying technique?
09 May 2024 6,365 3 View
I have two anode materials, Pristine and carbon-coated. Pristine theoretical capacity 1500 mA h/g and Carbon coated was calculated as material ratio 50:50 as 1500*0.5 + 375*0.5 = 930 mA...
27 April 2022 583 3 View
I am using Cu as a current collector and Li-Metal (200um) as a counter electrode. Current collector (Cu) area is 1.326cm2. How to calculate the current value and 1mAh/cm2 @ 0.5mA/cm2?
11 November 2021 9,851 0 View
How to perform Ciritical Current Density (CCD) test for Solid-State Lithium Metal Battery? what will be the cell structure? lithium dia should be larger/smaller/same than current collector? I am...
27 July 2021 8,416 5 View
IF I make a solution for composite material using 1M of each precursor X and Y in 100ml solution (the total solution is 100ml). SO, for comparison now I have to make the same solution (100ml) for...
26 February 2020 5,932 3 View
Generally, Cu peaks intensity are higher to lower from (111), (200) and (220). My XRD result is showing reverse. Any Idea why? (see Picture)
06 March 2019 8,734 2 View
