Which theoretical approach the two models of Ansys for Damage Evolution Law are based ?

06 August 2020 2,062 3 View

What kind of drug molecules could be fused to produce fused prodrugs?

There are some studies on fused drug molecules. Sultamicillin is one of the example for this type of prodrugs. The drug would be hydrolized and reveals two different active molecules which is...

18 April 2020 4,758 3 View

Is Refrigerant (R-1234yf) gas high risky flammable and explosive according to ATEX requirements?

we are planning to use Refrigerant (R-1234yf) gas and would like to have prediction to evaluation for measurements against explosion both explosive, flammable areas. So that flammability level is...

10 July 2019 8,943 2 View

What is the formula for heat exchange between mass oil in a tank and ambient?

I have a tank of lube oil which is not insulated and top of tank is a compartment, in other words, tank is the bottom of the auxiliary compartment. The volume of tank is 25.000 liters. Because we...

27 March 2018 1,388 5 View

Could you help me anyone to choose the best configuration of the microscope for mono or dFISH staining of fish chromosomes?

a) Leica DM4B b) Zeiss Axioimager 2 c) Nicon Eclipse NiE d) Olympus BX53 How config is the best performance for FISH staining of chromosome? Could you give me a detailed config of fluorescence...

09 June 2017 1,808 3 View

Do you know the main active substance in lavandula stoechas?

08 April 2015 9,098 7 View

Can errors in input data be included in the training phase of ANN?

Let one of the input data is 1.34 (+-0.25 error). Can someone include this error (+-0.25) to input data during training of the ANN?

15 February 2013 9,972 8 View

How to calculate and interpret the odds ratio between genotype and disease?

I have attached the data of my results but I'm not sure how to proceed, could you help me?

11 July 2012 6,000 4 View

COVID-19 Infection Map Generation and Diagnosis from Chest X-Ray Images

QaTa-Cov19 Project Watch: https://www.youtube.com/watch?v=KRuv86R887c&feature=youtu.be Visit: http://qatacov.live/ QaTa-Cov19 is a joint project developed by researchers in Qatar...

01 January 1970 6,362 3 View

COVID-19 Online Infection Map Generation and Diagnosis from Chest X-Ray Images

QaTa-Cov19 Project: http://qatacov.live/ QaTa-Cov19 is a joint project developed by researchers in Qatar University and Tampere University for an accurate diagnosis, early detection and infection...

01 January 1970 6,837 6 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

How to compare two groups with only two measurements?

Hiiiii everyone! I have an enquiry on statistical analysis. I was looking for many forum and it's still cannot solve my problem. I want to compare means of two groups of data but only with two...

03 March 2021 8,796 3 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View