Why the Crystallite size of he sample will decrease ?

Abdulkareem Ghassan Alsultan @Abdulkareem_Alsultan

08 August 2015 0 6K Report

I want to Know why when we increase the doping metal the Crystallite size will reduce the size

if you have any journal sport it I ill be very thankful

Badges
Science method

More Abdulkareem Ghassan Alsultan's questions See All

How we can determine absorption of aggregate if we have absorption value for each fraction size?

I want to determine absorption of aggregate if we have absorption value for each fraction size, may I know which eq. is correct ?

03 April 2018 501 2 View

What is the best solvent to remove formaldehyde from the thin film?

what is the best solvent to remove formaldehyde from the thin film. I am preparing polymer as biosensor for formaldehyde, what is the best solvent to remove it?

31 December 2017 8,513 5 View

What is the most important Characterization for imprinted polymer molecular print in biosensor?

I want to know the most important Characterization for imprinted polymer molecular print in biosensor for formaldehyde detection.

07 August 2017 7,288 1 View

What's the proportion for the peak area of identifiable compounds based on NIST database to the total detected products used GC-MS?

Hi The reviewer ask this question What's the proportion for the peak area of identifiable compounds based on NIST database to the total detected products used GC-MS? what he mean by this ? and...

06 July 2017 3,119 11 View

Which is the best simulation program for catalysis?

Dear friends May I knew which is the best simulation program for heterogeneous catalysis?

05 June 2016 3,820 2 View

How can I get scholarship?

Dear friends . I have master in catalysis for energy and I like to continue for Phd can you help me to find scholarship or if you know any supervisor can pay for me(fund) from any country if you...

05 June 2016 6,950 3 View

Any advice on Quartz XRD plate analysis?

Hi I just ordered XRD plate ( Quartz plate). when I run the plate without sample I got the results on the picture is this results normal ? and How can I calpreat the plate to get good result? any...

09 October 2015 381 6 View

Is there any program for FTIR you give him the peak number?

Is there any program for FTIR that gives you the peak number then will give you the odds of the funactional group

01 February 2015 8,676 11 View

Can anyone help me with a biodiesel reaction ?

Last time I did 7 reactions and I got 2 layers (after removing the methanol), but now I run the same Cat and there is only one layer. **note:- I took my oil ( waste cooking oil from my friend he...

01 February 2015 4,855 13 View

Is it possible to use a base catalyst for waste cooking oil for biodiesel protection ?

The acid value for my west cooking oil is 18.4 .So can I use base catalyst for biodiesel? or can I use catalyst with 2 function acid and base ?

01 February 2015 7,929 6 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

I can't see the ssDNA band after performing asymmetric PCR. Is there any way to do this?

After performing symmetric PCR, PCR purification was performed. Afterwards, asymmetric PCR was performed using the PCR purification product as a template, but no ssDNA band was confirmed in the...

08 August 2024 1,668 3 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View