I want to know the most important Characterization for imprinted polymer molecular print in biosensor for formaldehyde detection.
I think that it is extremely difficult to make a molecular imprint for formaldehyde. It is a very small molecule. In these cases, a designed chemosensor might be the better concept.
I want to determine absorption of aggregate if we have absorption value for each fraction size, may I know which eq. is correct ?
03 April 2018 501 2 View
what is the best solvent to remove formaldehyde from the thin film. I am preparing polymer as biosensor for formaldehyde, what is the best solvent to remove it?
31 December 2017 8,513 5 View
Hi The reviewer ask this question What's the proportion for the peak area of identifiable compounds based on NIST database to the total detected products used GC-MS? what he mean by this ? and...
06 July 2017 3,119 11 View
Dear friends May I knew which is the best simulation program for heterogeneous catalysis?
05 June 2016 3,820 2 View
Dear friends . I have master in catalysis for energy and I like to continue for Phd can you help me to find scholarship or if you know any supervisor can pay for me(fund) from any country if you...
05 June 2016 6,950 3 View
Hi I just ordered XRD plate ( Quartz plate). when I run the plate without sample I got the results on the picture is this results normal ? and How can I calpreat the plate to get good result? any...
09 October 2015 381 6 View
I want to Know why when we increase the doping metal the Crystallite size will reduce the size if you have any journal sport it I ill be very thankful
07 August 2015 6,192 0 View
Is there any program for FTIR that gives you the peak number then will give you the odds of the funactional group
01 February 2015 8,676 11 View
Last time I did 7 reactions and I got 2 layers (after removing the methanol), but now I run the same Cat and there is only one layer. **note:- I took my oil ( waste cooking oil from my friend he...
01 February 2015 4,855 13 View
The acid value for my west cooking oil is 18.4 .So can I use base catalyst for biodiesel? or can I use catalyst with 2 function acid and base ?
01 February 2015 7,929 6 View
I want to explore the long-term effects of incarceration on a youth's developing brain. I also want to explore research that looks critically at incarceration and punitive measures as the primary...
12 August 2024 862 0 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...
08 August 2024 4,842 0 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it
06 August 2024 947 1 View
Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...
05 August 2024 3,783 2 View
What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?
04 August 2024 1,078 1 View
Please go through my Abstract. I can also share a proposed Thesis Outline.
04 August 2024 2,077 0 View
If you think of electrons with spin as bar magnets, you know bar magnets of opposite polarity as long as they're not occupying the same spatial location don't cancel out each other's magnetic...
03 August 2024 3,927 2 View
I have been publishing the Nepalese Journal of Agricultural Sciences (online ISSN 2091-0428; print ISSN 2091-042X) on www.nepjas.com and research gate. I was wondering how I can get an impact...
01 August 2024 1,277 1 View