Why does the L2 edge in NiO's SXAS data split into two peaks?

Tao Zeng @Tao-Zeng-34

02 May 2024 1 824 Report

Please ask experts to help answer, why the NiO L2 edge data will split into two peaks in SXAS.

Gerhard Martens

Dear Tao Zeng ,

please have a look at the discussion in the section

'In-situ X-ray absorption spectroscopy at the nickel and iron L- and K-edges'

at the bottom of page 3 (in the .pdf) about the split of the L3 and L2 edges of Ni:

https://www.nature.com/articles/s41598-018-37307-x

There are also references mentioned (47, 48) about that subject...

Best regards

G.M.

Badges
Science topic

More Tao Zeng's questions See All

Request Python code?

Request Python code from this article : Gender equity of authorship in pulmonary medicine over the past decade. THANKS!

08 August 2024 6,242 2 View

What are the factors that causes the sample to have higher efficacy at lower concentration?

We conducted an antibacterial study of a plant extract. Varying concentrations of crude extract were subjected to microbroth dilution assay. The result showed that only the lowest concentration of...

31 July 2024 8,666 3 View

What topic or subject does Production Engineering need to address more?

Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?

27 July 2024 648 3 View

Why knockouts for same genes from two different gRNA are showing different result?

Why knockouts for same genes from two different gRNA are showing different result? I followed CRISPR-CAS9 gene editing technology.

25 July 2024 8,313 1 View

Does a Banach algebra version of "the sum of a closed subspace and a finite dimensional subspace is always closed" exist?

In the setting of Banach spaces, it is well know that if $M$ is a closed subspace of a Banach space $X$ and $F$ is a finite dimensional subspace of $X$, then $M+F$ is closed. Does a Banach...

16 July 2024 8,437 4 View

For 3d transition metal elements, is there a mathematical expression for the energy E in their hard X-ray absorption spectrum?

Only the absorption side is considered, and the fine structure of the extended side is not considered

05 July 2024 2,894 2 View

How to realize charge and discharge of in-situ batteries in PPMS? Is there any expert scholar who can give me some advice?

The difficulty lies in how to miniaturize the battery. The sample holder is only 6.5mm, which means that the width or height of the battery cannot exceed 6.5mm (the height is about 3cm). I hope...

05 July 2024 8,141 0 View

How to grow Geobacter sulfurreducens to a higher density?

Hello I am currently working with Geobacter sulfurreducens, an anaerobic bacterial strain which requires special media (NBAF) and conditions (N2:CO2::80:20 and 30 degreeC) to grow. It is my first...

03 July 2024 6,456 1 View

Is it necessary to add stop solution in Elisa plate?

30 June 2024 8,235 2 View

Is the Laplace transform is a special case of the Soham transform?

Is there any connection between Laplace and Soham transforms?

29 May 2024 7,636 2 View

Melt curve problem in qPCR?

Do these peaks in the curve indicate primer dimer or non-specific products?

01 August 2024 7,466 0 View

How to improve peaks separation in HPLC?

Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...

30 July 2024 435 3 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View

Validated HPLC method for the estimation of the Amphotericin B ?

During the release test of Amphotericin B using 1% Tween 80, i observed three peaks even in the standard. The first peak consistently yielded results around 500%, while the other peaks showed...

08 July 2024 1,330 0 View

Why there are no peaks at downfield NMR of Cobalt and Nickel complexes?

I synthesized some paramagnetic cobalt and nickel complexes (expected to be Co(II) and Ni(II)) using a bidentate ligand - N of pyridine ring (aromatic) and O of P=O (aliphatic), and I obtained...

03 July 2024 3,410 4 View

How can I put small FWHM in CasaXPS?

I'm trying to fitting Cu Auger peak into various state (Cu0, Cu+, CuI etc..) In Cu0, one of the peak's FWHM is 0.84 but when I try to enter smaller value than 0.89, "input error" is occured. How...

02 July 2024 4,932 3 View

What is the reason of appearance of 2 or 3 peaks in zeta potential analysis of sample?

Hello I have prepared metal nanoparticles and did zeta potential. Normally there is a single peak in sample but now there are 3 peaks. I prepared sample for analysis first I prepared 10 mg/mL...

30 June 2024 1,063 4 View

EDS or EDX concetration finder?

Hello everyone, I'm facing an issue with EDS software that prevents me from obtaining atomic or weight percentages for my scan. However, I do have access to the raw data, which shows intensity vs....

29 June 2024 6,664 14 View

Could you please help me to match the XRD peaks of MoVO oxides?

Hi all, I have few XRD files of MoVO oxides. These are newly synthesized compounds. Can anyone suggest me, how can check my XRD files from database? I want to match my XRD peak to the database. Is...

24 June 2024 6,448 3 View

What does an increase in intensity mean in GIXRD?

When I examined the GIXRD data obtained recently, I observed that the sample treated with O2 plasma on the Cu surface deposited on Si chips showed increased intensity compared to the sample...

19 June 2024 6,900 5 View