Can someone explain what could be the possible reasons for this?
Hello ResearchGate Community, I am currently working on my final year undergraduate project, which involves the compression testing of tissue scaffolds, specifically focusing on neural and bone...
02 March 2024 4,600 1 View
I have a grid connected 5KW system with 16 panels, with individual panel rating ranging from 36-40 V at 8 A connectedin series give approximately 500-600 V at 8 A. In times of power outage, the...
22 July 2020 7,428 5 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,176 0 View
Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...
05 August 2024 3,783 2 View
All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.
01 August 2024 589 4 View
I am trying to adapt adherent CHO-K1 cells in F12K+10%FBS to suspension culture in only F12K, but in vain. I have followed Mirus bio as well as Thermo protocols, please suggest any alternative....
31 July 2024 3,756 0 View
Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.
31 July 2024 9,140 2 View
Hello everyone, I am new to this characterization but watching videos on youtube I have already plotted a Nyquist plot (Z' and -Z'') and already fitted models on my material using Zsim. But now I...
29 July 2024 1,376 0 View
Please note it
29 July 2024 4,920 3 View
We have encountered an issue with the serum of mice being hemolyzed after the process of centrifugation. Could you please provide guidance to prevent hemolysis ?
29 July 2024 8,402 4 View