Which is the best wavelength to study aerosol optical depth(AOD) related to climate reseach,which criteria must be adopted in choosing the wavelengh?

We are doing a study on impact of aerosol on precipitation. Which satellite data and which wavelength will be the best. or can some one suggest a criteria to be adopted to choose an instrument...

12 February 2021 6,324 3 View

How do Research Gate proceed to integrate in the reference data publications and citations the recently published journals ?

How do Research Gate proceed to integrate in the reference data for publications and citations the recently published journals - for instance for the last months of 2020 and for instance Intl J...

02 February 2021 9,336 7 View

How to take XRD of colloidal Ag NPs?

I have synthesized silver nanoparticles using sodium citrate as reducing agent. I have carried out XRD characterization by drop coating colloidal solution on the glass substrate ( since yield in...

27 January 2021 1,416 3 View

How to revive bacteria from glycerol stock?

19 January 2021 7,025 4 View

Is there a way to identify the clay mineral based on the Si:Al ratio that has been obtained through EDAX analysis?

I have come through a few literature,were the presence of particular clay mineral has been validated through the Si:Al ratio obtained from EDAX analysis. But, I would like to understand the basic...

08 January 2021 5,982 6 View

What are the inhibitors or chemicals which prevent the amplification of plant DNA? How they can be remove?

While doing amplification with Primers ( which already gave good amplification in same genus), it fails many time, eventhough the extraction has enough amont of DNA.

31 December 2020 5,649 4 View

How can I analyse and compare crop yield under different irrigation methods?

I have to compare yield parameters of a tree crop grown under three irrigation methods. But these systems are already established separately in three adjacent fields. Since I can not follow a RCBD...

21 December 2020 3,065 5 View

How can we find crop transpiration (Tr) value from ETo values in Aquacrop model?

it like how we can get Tr value separately from ETo values in Aquacrop

20 December 2020 5,817 3 View

How Healthcare Personnel help frontline workers cope with stress and mental burden during COVID-19?

Which methods does they suggest to ease the burden and stress as a teamwork?

09 December 2020 9,605 7 View

Why Negative peak eluted in HPLC analysis?

I'facing problem while doing HPLC analysis due to negative peak was eluted which was corresponding to the principle peak RT. I tried to remove, with different solvents, but no use. i want to know...

26 November 2020 1,960 5 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

How can I measure the thickness of thin layers deposited on textured glass susbtrates?

I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.

21 February 2021 5,465 4 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

What is the best substrate for exfoliating few layers of hexagonal boron nitride (hBN) using traditional scotch tape method?

Unlike graphene, it is usually very difficult to exfoliate few layers (~10 nm thick) of hBN on SiO2 substrate due to lip-lip interaction at the edges. Au substrates have been proven very useful...

16 February 2021 2,635 2 View

How can I calculate teh crystallinity degree of graphene oxide?

I had treat my XRD diffraction pattern by Highscore to calculate the crystallinity degree Xc and I have the formula but I dont no the 2Theta of Ac and Aa to calculate Xc. Is it like polymers...

10 February 2021 6,305 5 View

About XRD details of pristine and doped RGO?

Hi Can anyone please help me know the XRD details of reduced graphene oxide, Nitrogen doped reduced graphene oxide, Sulphur doped reduced graphene oxide, Nitrogen and Sulphur co-doped reduced...

08 February 2021 3,033 3 View

What is the difference between Graphene Oxide and Expanded Graphite?

What are the main differences between Graphene Oxide and Expanded graphite, in terms of surface functionalities, conductivity, d-spacing and other features? Is the term expanded graphite...

06 February 2021 9,810 4 View