Applications of Micro EDM on Maraging Steel grades 300 & 350
I am trying to model RCC beam with induced corrosion. How to model this beam using model updating technique.
14 July 2024 3,536 3 View
I already selected zone and label the sequence of peptide and protein binding site. Now I want to copy the residues involved in 5 A. If anyone know the procedure without manually kindly...
20 June 2023 1,144 2 View
There are different types of crucible material is available for calcination. What are the different crucibles that can be used for talc?
20 March 2023 5,314 2 View
Filename : wrfout_d01_2023-02-09_00:00:00 I'm trying to get time series data of solar Irradiance in a csv or excel form from this wrfout file. Thank you Naveen Venkat National Institute of...
14 February 2023 4,581 0 View
Hello, I want to prepare a thick layer of PDMS + Cu Nanowires composite electrode (2wt% to 6 wt% or higher) to improve conductivity, with a dimentions range of 10 mm x 10 mm and 20 mm x 20 mm,...
27 January 2023 9,749 2 View
I'm trying to plot solar irradiance or GHI from WRF output. Is there any python script to visualize this ?
03 January 2023 3,924 2 View
I am trying to get historical AQI data for cities across the world. Air Quality Open Data Platform (https://aqicn.org/data-platform/covid19/) has extensive data, but 2015-2018 data is available...
19 October 2022 4,424 3 View
In a recent lecture during the construction of a temple in our region, it was shown that one of the rock got cracked during the excavation done for the foundation work and the rock is being...
21 September 2022 340 2 View
What are the economics of Performance-based design in terms of cost compared with the more traditional methods of design (force-based)? IS there any case study available for RC structures?
24 July 2022 8,724 0 View
Can we discuss the pros and cons of Performance-Based Design in an impartial way.
24 July 2022 892 0 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container
30 July 2024 7,326 1 View
The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...
27 July 2024 8,508 0 View
Please investigate the effect of temperature and strain rate of hot deformation and the formation of delta ferrite in martensitic stainless steel 410?
25 July 2024 9,408 0 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
I am simulating interlocking / dry stacked masonry in Abaqus. I am using a friction coefficient of 0.6 for my model as it is stated in the previous research as well as in the base paper. The...
16 July 2024 5,047 0 View
In the expression for solid solution strengthening model that has been widely used in the literature use a linear form consisting of strength coefficient, and concentration of elements in wt.%....
11 July 2024 4,476 3 View
I am trying to replicate results published in the journal paper published recently (Modeling of Laser-assisted micro-milling Inconel718 ). In that paper, they used vdflux subroutine to obtain...
05 July 2024 3,701 0 View
Dear colleagues, I'm currently modelling a simple 4-point bending test of a concrete beam in Abaqus. However, the load-displacement curve was ascending (without final point), which didn't match...
29 June 2024 6,192 2 View
