How should I write a cover letter for a revised paper to be published in IET Circuits, Devices, and Systems (IET_CDS)?

I have submitted a paper in IET_CDS, and it got "rejected with re-submission". I should submit a cover letter besides the revised paper to show the reviewers that I have improved my manuscript...

07 August 2016 3,743 3 View

Where can I find fab labs for fabricating OTFT-based circuits (Organic thin film transistors)?

I do research in the area of OTFT circuits, fabrication fascilities is somewhere not available in my country, I need fab labs that can fabricate my designs, and how much it will cost me. Thank you...

06 July 2016 4,908 3 View

Any expert in publishing papers at IET journal of Circuits, Devices, and Systems?

I am thinking of submitting a manuscript at this journal, I wanna know its rejection rate, anything special about it, and any other tips to make sure I get acceptance. Thanks.

03 April 2016 946 0 View

What really happened when spin-coating cross-linked PVP above inkjetprinted thin-film of TIPS-Pentacene solved in Toluene in the fabrication of OFET?

After printing a thin-film of TIPS-Pentacene solved in Toluene, drying it for 1h in air, cross-linked PVP with PGMEA as a solvent and poly-melamine-formaldhyde as a cross linking agent has been...

02 March 2016 1,713 1 View

What are the main differences between a transistor model and a compact model ?

31 December 2015 9,112 2 View

What are the analog/mixed-signal circuits that are not implemented in OFET (Organic Field Effect Transistor) technology?

Is there any type of circuits that has been implemented in CMOS and not implemented in OFET yet? and why?

31 December 2015 2,133 1 View

Where can I find books/papers about transistor modeling?

I am trying to model an OTFT I have fabricated, I need some guides about how i can do that.

31 December 2015 7,972 4 View

What are the physics concepts behind charge transport in organic thin film transistors?

I read about charge transport models in organic thin film transistors, there are three models as far as I know: VRH, MTR, Polaron. Is there any other models? How are they used to model the OTFT...

10 November 2015 5,725 4 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How does elongation affect the resistance of an electrode?

What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.

22 February 2021 1,515 1 View

Is that possible to do an impedance measurement without FRA module?

One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...

21 February 2021 418 2 View

Do you know this error? The experiment was stopped by a potential overload on Vs (auxiliary electrode)?

Hello everyone Do you have any information about this error 'The experiment was stopped by a potential overload on Vs (auxiliary electrode)' in Origamaster software? I tried everything possible,...

19 February 2021 3,152 7 View

Which compound is getting oxidized during bulk electrolysis with TFAA?

The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...

18 February 2021 4,430 1 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View