How should I write a cover letter for a revised paper to be published in IET Circuits, Devices, and Systems (IET_CDS)?

I have submitted a paper in IET_CDS, and it got "rejected with re-submission". I should submit a cover letter besides the revised paper to show the reviewers that I have improved my manuscript...

07 August 2016 3,743 3 View

Where can I find fab labs for fabricating OTFT-based circuits (Organic thin film transistors)?

I do research in the area of OTFT circuits, fabrication fascilities is somewhere not available in my country, I need fab labs that can fabricate my designs, and how much it will cost me. Thank you...

06 July 2016 4,908 3 View

Any expert in publishing papers at IET journal of Circuits, Devices, and Systems?

I am thinking of submitting a manuscript at this journal, I wanna know its rejection rate, anything special about it, and any other tips to make sure I get acceptance. Thanks.

03 April 2016 946 0 View

What really happened when spin-coating cross-linked PVP above inkjetprinted thin-film of TIPS-Pentacene solved in Toluene in the fabrication of OFET?

After printing a thin-film of TIPS-Pentacene solved in Toluene, drying it for 1h in air, cross-linked PVP with PGMEA as a solvent and poly-melamine-formaldhyde as a cross linking agent has been...

02 March 2016 1,713 1 View

What are the main differences between a transistor model and a compact model ?

31 December 2015 9,112 2 View

Where can I purchase silver ink for electrodes in printed OFETs?

31 December 2015 7,881 5 View

Where can I find books/papers about transistor modeling?

I am trying to model an OTFT I have fabricated, I need some guides about how i can do that.

31 December 2015 7,972 4 View

What are the physics concepts behind charge transport in organic thin film transistors?

I read about charge transport models in organic thin film transistors, there are three models as far as I know: VRH, MTR, Polaron. Is there any other models? How are they used to model the OTFT...

10 November 2015 5,725 4 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View