How define one baker unit(BU) is the amount of hydrogen peroxide catalase ?

07 February 2021 2,006 1 View

Where is the active point of VCSEL?

I am now working on the coupling between vertical-cavity surface-emission laser(VCSEL) and waveguide. However, the window design for laser emission is larger than the waist of Gaussian beam...

27 January 2021 8,318 1 View

Why does COD increase over time when external carbon sources are added in the denitrification process in waste water?

Why does COD increase over time when external carbon sources are added in the denitrification process in waste water? After 1 hour, the concentration increased from 30mg/l to 40mg/l after 20...

17 January 2021 374 9 View

Seperate of organic and inorganic phosphorus in waste water?

Is it possible to separate organic and inorganic phosphorus in wastewater with a filter?

14 January 2021 952 3 View

How to propose constitutive response functions during continuum modeling?

To develop constitutive models in continuum mechanics, one must consider kinematics, balance of momentum, balance of energy, and free-energy imbalance. Next, one must propose constitutive response...

02 January 2021 9,692 4 View

Why use STOP solution in ELISA?

At the last step for data analysis, we always use a STOP solution to stop the TMB oxidized by HRP. Why do we have to stop the reaction? Couldn't we measure the color wavelength of...

17 November 2020 5,177 3 View

How should I explain when the result of CV is good but cyclic charge-discharge is poor in a battery cell test?

I had some CV and cycling test for my battery half-cells. In the CV tests, they were reversible and performed very well. But during the rate performance and the cycling test, they ran only at a...

08 November 2020 7,978 4 View

How to change the title of an article?

Hi All, I have a problem with changing the title of an article added to my account. I have tried to change the title but the attempts always failed. I also tried to add a new one with the correct...

07 September 2020 3,901 3 View

DNA is not precipitating after incubating in ethanol overnight?

I am working on the soil microbiome of heavy metal contaminated soil. I extracted gDNA from the soil sample using the FastDNA Spin Kit and performed ethanol precipitation to clean up the salt...

01 September 2020 3,923 2 View

How to exchange the buffer of peptide ~1KD?

This is a peptide about 1KD in size. The commercially synthesized powder was reconstituted with a citrate buffer(pH 7) and the solution turns acidic, pH ~4. The assay requires a pH at 7 so some...

31 August 2020 870 6 View

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

What is the indication of the absence of peaks in Methanol electrooxidation CV curves ?

I have several question regarding the MOR; hope anyone help me better understand. 1- in CV using (KOH+MEOH) what is the indication of absence of the redox peaks? shouldn't they exist as a sign...

28 February 2021 4,851 8 View

Which database would give me this list of chemical components?

Dear colleagues: I would like to know if anyone knows of a database that gives me the parameters pH, K, K, Mg, P, C, N, Zn, Cu, Ni and Cd of common foods. I find a lot of information of proteins,...

26 February 2021 5,525 3 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

No title

22 February 2021 9,932 11 View

Can anyone help or comment on solubilising chlorobutanol in aqueous injections in minimum time possible?

Please suggest solubilisation of chlorobutanol in injections. Tried pH and high temperature. But the issue is of assay drop. If anyone can suggest any solution. Its a commonly used excipient for...

21 February 2021 7,397 1 View

What reaction will occur when adding hexamine into ammonium nitrate in an acidic medium?

Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...

21 February 2021 8,680 1 View

What properties of water shall be analyzed and evaluated to test the effectiveness of activated carbon?

I would like to ask what other properties of water (pH and such) shall be analyzed and evaluated to test the effectiveness of activated carbon from filtering the contaminants present in the water?

20 February 2021 9,422 8 View

Phenol-pH graphic?

We want to use phenol pH graphic to measure the pH of mediums before and after inhibitor application to cells. We have phenol absorbence values at 460, 560 and 720 nm wavelength. When we measure...

20 February 2021 7,700 3 View